Is this going to be a problem?

[Woose1]

The screw on the bottom for the cup socket with the red ring around it, is not letting the backplate go all the way down  there is a mark in the fome where the screw hits the plate.

Will it be okay to force it down?, probably not?

[DXMember]

are you sure you are using the right mounting mechanism?

get a different cooler or grind the screw down

[Woose1]

Just now, DXMember said:

are you sure you are using the right mounting mechanism?

get a different cooler

There is no other way of mounting the backplate.

and i cant get a new one will take to long.

[DXMember]

3 minutes ago, Woose1 said:

There is no other way of mounting the backplate.

and i cant get a new one will take to long.

or grind the screw down

[Woose1]

Just now, DXMember said:

or grind the screw down

was thinking of doing that will i need to take it out first you think?

[DXMember]

Just now, Woose1 said:

was thinking of doing that will i need to take it out first you think?

if you are careful enough then you can getaway without taking it out

if you not sure, then take it out

[Woose1]

4 minutes ago, DXMember said:

if you are careful enough then you can getaway without taking it out

if you not sure, then take it out

Is it posibel to drill out an indentation in the back plate will that work to?

[tikker]

I know you said there's no other way of mounting it, but as I've never seen this before, are you absolutely sure you're mounting it correctly? 

At around 7:50 it looks to me you should rotate your backplate 90 degrees (got from your other topics that you have the Dark Rock Pro 3). Otherwise yeah, grind the screw down.

 

[Woose1]

2 minutes ago, tikker said:

I know you said there's no other way of mounting it, but as I've never seen this before, are you absolutely sure you're mounting it correctly? 

At around 7:50 it looks to me you should rotate your backplate 90 degrees (got from your other topics that you have the Dark Rock Pro 3). Otherwise yeah, grind the screw down.

 

HAHA now i fell fucking stupid, you are right it needs to be rotated 90 degrees. thanks for saving me!

[DXMember]

15 minutes ago, Woose1 said:

Is it posibel to drill out an indentation in the back plate will that work to?

yes

9 minutes ago, Woose1 said:

HAHA now i fell fucking stupid, you are right it needs to be rotated 90 degrees. thanks for saving me!

that's the first think I asked... are you sure you're mounting it the right way?

[tikker]

10 minutes ago, Woose1 said:

HAHA now i fell fucking stupid, you are right it needs to be rotated 90 degrees. thanks for saving me!

Glad I could help

[Woose1]

3 minutes ago, DXMember said:

yes

that's the first think I asked... are you sure you're mounting it the right way?

I know but i first notised it with the video... sorry

[19_blackie_73]

whoopsy, did the same mistake on mine... but it works fine...

I guess i have to reseat it within the next few days...

[Woose1]

1 minute ago, 19_blackie_73 said:

whoopsy, did the same mistake on mine... but it works fine...

I guess i have to reseat it within the next few days...

was about to just mount it like that but it seemd a bit wierd. so i saved my self from the hasel of reseating it.

[19_blackie_73]

27 minutes ago, Woose1 said:

was about to just mount it like that but it seemd a bit wierd. so i saved my self from the hasel of reseating it.

jep good move  but it isn't a problem the other way round, temps were fine