What Sub net mask to use

[Mr.Tech.Qc]

hey guys,

 

so im playing around with an old router, its default ip is 192.168.1.1, and sub net 255.255.255.0, and dhcp from 192.168.0.100 ... etc

 

i want to set it as 192.168.0.1, with a 192.168.0.1 and higher dhcp range

 

what settings do i have to change?

 

 

Thanks

[Dautin]

What is the model number of this router?

[Mr.Tech.Qc]

What is the model number of this router?

its a linksys befsr41

[Dautin]

How to change the routers IP to 192.168.0.1:

 

1 - Navigate to Network Setup under Advanced Configuration

2 - Change the Local IP Address to 192.168.0.1 from 192.168.1.1

3 - Leave the Subnet Mask the same.

4 - Save Settings

5 - This will require you to type 192.168.0.1 into your address bar, and re-login to the router.

 

Change DCHP Range:

 

1 - Navigate to Network Setup under Advanced Configuation

2 - Scroll down until you see Network Address Server Settings (DHCP)

3 - Change the start IP Address to 192.168.0.2 

4 - Set the Number of Addresses to the desired number.  I.e. if you wanted the range to be 192.168.0.2 to 192.168.0.60 you would enter 58.

5 - Save the settings

 

If this answers your questions please mark this thread as answered.  

[Mr.Tech.Qc]

How to change the routers IP to 192.168.0.1:

 

1 - Navigate to Network Setup under Advanced Configuration

2 - Change the Local IP Address to 192.168.0.1 from 192.168.1.1

3 - Leave the Subnet Mask the same.

4 - Save Settings

5- This will require you to type 192.168.0.1 into your address bar, and re-login to the router.

 

Change DCHP Range:

 

1 - Navigate to Network Setup under Advanced Configuation

2 - Scroll down until you see Network Address Server Settings (DHCP)

3 - Change the start IP Address to 192.168.0.2 

4 - Set the Number of Addresses to the desired number.  I.e. if you wanted the range to be 192.168.0.2 to 192.168.0.60 you would enter 58.

5 - Save the settings

 

If this answers your questions please mark this thread as answered.  

the dhcp process workes, but when i did the router ip process, i had to reset it since it did not respond

[Mr.Tech.Qc]

How to change the routers IP to 192.168.0.1:

 

1 - Navigate to Network Setup under Advanced Configuration

2 - Change the Local IP Address to 192.168.0.1 from 192.168.1.1

3 - Leave the Subnet Mask the same.

4 - Save Settings

5- This will require you to type 192.168.0.1 into your address bar, and re-login to the router.

 

Change DCHP Range:

 

1 - Navigate to Network Setup under Advanced Configuation

2 - Scroll down until you see Network Address Server Settings (DHCP)

3 - Change the start IP Address to 192.168.0.2 

4 - Set the Number of Addresses to the desired number.  I.e. if you wanted the range to be 192.168.0.2 to 192.168.0.60 you would enter 58.

5 - Save the settings

 

If this answers your questions please mark this thread as answered.  

lol nvm, thx it works

[Dautin]

lol nvm, thx it works

Great, glad I could help.

[Wombo]

the dhcp process workes, but when i did the router ip process, i had to reset it since it did not respond

That's because you changed the IP address of the device you were connecting to. You were connected to 192.168.1.1 but you changed its address to 192.168.0.1. All you would need to do is change the address in your web browser to the new address of the device.

[Mr.Tech.Qc]

That's because you changed the IP address of the device you were connecting to. You were connected to 192.168.1.1 but you changed its address to 192.168.0.1. All you would need to do is change the address in your web browser to the new address of the device.

no that was not it, i had to reboot the router