1 rad 2 rad 3 rad or more.

[Beaches]

take a look at this silly mock up i just made and tell me if this is right or wrong.

[DieHörnær]

take a look at this silly mock up i just made and tell me if this is right or wrong.

 

Yea it could work like that, check the clearance under the GPU though [probs only able to fit under one titan x], the fill port on the DBAY is on the top and the inlet and outlet on the rear, you might have some tight bends at the back, but you can just use some 45 deg or 90 deg fittings to make a right straight away. Tubing from the GPU could be a problem, It depend which way you orientate the radiators i.e where the ports are?

[Beaches]

what abount mounting the rad/res combo on the roof of the case, still on the inside but on the roof,by the cpu maybe or something like that, no clue how i would mount it up there but there would be no graphics cards or anything,

i emailed the dude from singularity computers about getting a water box built, maybe that might solve my problems, but for the time being i still need a way to have an on-board pump/res unit installed 

 

Yea it could work like that, check the clearance under the GPU though [probs only able to fit under one titan x], the fill port on the DBAY is on the top and the inlet and outlet on the rear, you might have some tight bends at the back, but you can just use some 45 deg or 90 deg fittings to make a right straight away. Tubing from the GPU could be a problem, It depend which way you orientate the radiators i.e where the ports are?

[Voldy21]

This is what jayztwocents uses

http://www.performance-pcs.com/ek-xres-100-d5-pwm-incl-pump.html

This one is recomended many times by Linus

http://www.frozencpu.com/products/2128/ex-pmp-27/Swiftech_MCP655-B_12v_Water_Pump_w_38_Conversion_Kit_317_GPH.html

 

The fans are...excellent, if you got the money, pretty much best fans on the market, altho if you got more than enough rad surface you can use lower RPM fans, the NF-P15 redux are excellent, gentle typhoons, EK Vardars, Fractal design Venturis, silverstone air penetrators, noiseblockers, lots of very high quality quiet high SP fans out there

For what i've heard, D5 pumps are the best, both i linked are D5 and maybe the reservoir/pump combo thing may fit your needs, if not, the swiftech one is still the gold standard

I would put a 280mm rad on the top and a thick low fin density 240 on the front, so you can get airflow into the case. Maybe you can benefit from  push/pull, and i would put either AP123s or Noctua NF-F12 pulling air into the case through the rad. I like this particular fans because they have channeled airflow, which is useful in restricted enviroments (AKA rads)

Frozen CPU is closed. They aren't selling anything and if you order from there you won't get anything. That's been the case for months now.

[tomas710]

Frozen CPU is closed. They aren't selling anything and if you order from there you won't get anything. That's been the case for months now.

i was using it as an example, to get the whole name, that kinda thing, retailers ain't my forte, i live in Chile

[bcredeur97]

5 rad 6 rad 7 rad oh im so poor...

[DieHörnær]

Yo Face!

 

This guy is doing a loop in an 804 as well - http://linustechtips.com/main/topic/398394-project-red-gotham-980ti-sli-custom-water-cooled-node-804/

 

Gives you some perspective.