First time sleeving. Good or c*ap?

[Polish_Laska]

I know it's not the best but for my first time sleeving what do you think guys?

 

I do have to paint the text on heat-shrink or paint it at least.

[sabot]

Looks good to me.

[bchampion96]

Looks pretty decent to me as well. 

[Polish_Laska]

Looks good to me.

Thanks dude, I think I need to get 1 or 2 mm bigger sleeving because as you can see its stretchered.

[Andi]

not bad!

[Worth]

Not bad, I wish I had the patience for doing that

[Polish_Laska]

Not bad, I wish I had the patience for doing that

haha I know what you mean, It took me around 10 minutes -.-

[Polish_Laska]

Does anyone know what size sleeving I will need for individual PUS cables?

[knight_40k]

3mm sleeves for individual cables.

[pexon]

The sleeving needs to but up to the connector. You can see there is very little heatshrink gripping the sleeve, I can bet the sleeving will pop out under little pressure. Also interested to know why you are using double shrink on half the cable?

[slasher0161]

For a first shot I would say that isn't a bad effort at all, your sleeve could use going a little closer to the connector but I would say that is solid work for a first attempt (I also can't imagine sata cables being the nicest things to sleeve for a first attempt).

[TheMrBeb]

Does anyone know what size sleeving I will need for individual PUS cables?

have a look at MDPC-x sleeving http://en.mdpc-x.com/mdpc-sleeve.htm

[Undieing_Lust]

Looks dead on.

[NinjaStyle013]

Looks fine but yeah the sleeve doesn't look like its snugly under that heatshrink.

[Giancarlo124]

Looks pretty good.

[CJPowell27]

Looks nice!

[JordanMac]

looks good, you might want to pull the sleeving tighter though so there are less gaps.

[Xelithium]

I have no idea how a better sleeved SATA cable would look so you did a good job.

[legopc]

not bad not bad i wish i knew how to sleef a sata cable 

[Jackfrost]

like dat colar!!!!! where did you get it?

[Polish_Laska]

looks good, you might want to pull the sleeving tighter though so there are less gaps.

I need bigger sleeving for there not to be any gaps as I only got 6mm I think

 

like dat colar!!!!! where did you get it?

http://myworld.ebay.co.uk/cheesefeat?_trksid=p2047675.l2559

[Emkryan]

Nice RAT 7. 

[Polish_Laska]

Nice RAT 7. 

R.A.T 5 ;)

[PBaines]

from someone who's been sleeving for a while I would say it isn't "bad"

 

If you want to "do it once do it right" get your sleeving stuff from http://en.mdpc-x.com/ Yes you do pay a bit of a premium for the stuff. But since Sleeving is a premium mod you want to make sure you use the best stuff available

[Emkryan]

from someone who's been sleeving for a while I would say it isn't "bad"

 

If you want to "do it once do it right" get your sleeving stuff from http://en.mdpc-x.com/ Yes you do pay a bit of a premium for the stuff. But since Sleeving is a premium mod you want to make sure you use the best stuff available

I'm from USA and I just calculated that I can get 3 rolls of 10 meters (33 feet) worth of sleeving (one blue,black and white) for just under $40 AFTER shipping. that's a very good deal for 99 feet of sleeving.