Jump to content

2 psus connected into one

Bajantechnician

Yes there are adapters for that, many don't recommend them since the molex side of the connectionscan be overloaded at times if a poor connection occurs, Also for your 450W PSU that will be maxing it out if you have say a Titan X and an i7 CPU, what is your highest wattage PSU you have on hand:

RmxBl.png

450,

titan z

fx 4300

Link to comment
Share on other sites

Link to post
Share on other sites

also, i dont need the 24 pin.

i need 2, 8 pins

You need the 24 PIN to turn the unit ON.

The New Machine: Intel 11700K / Strix Z590-A WIFI II / Patriot Viper Steel 4400MHz 2x8GB / Gigabyte RTX 3080 Gaming OC w/ Bykski WB / x4 1TB SSDs (x2 M.2, x2 2.5) / Corsair 5000D Airflow White / EVGA G6 1000W / Custom Loop CPU & GPU

 

The Rainbow X58: i7 975 Extreme Edition @4.2GHz, Asus Sabertooth X58, 6x2GB Mushkin Redline DDR3-1600 @2000MHz, SP 256GB Gen3 M.2 w/ Sabrent M.2 to PCI-E, Inno3D GTX 580 x2 SLI w/ Heatkiller waterblocks, Custom loop in NZXT Phantom White, Corsair XR7 360 rad hanging off the rear end, 360 slim rad up top. RGB everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

is a 450 enough for a titan z and a fx 4300?

Hell no.

The New Machine: Intel 11700K / Strix Z590-A WIFI II / Patriot Viper Steel 4400MHz 2x8GB / Gigabyte RTX 3080 Gaming OC w/ Bykski WB / x4 1TB SSDs (x2 M.2, x2 2.5) / Corsair 5000D Airflow White / EVGA G6 1000W / Custom Loop CPU & GPU

 

The Rainbow X58: i7 975 Extreme Edition @4.2GHz, Asus Sabertooth X58, 6x2GB Mushkin Redline DDR3-1600 @2000MHz, SP 256GB Gen3 M.2 w/ Sabrent M.2 to PCI-E, Inno3D GTX 580 x2 SLI w/ Heatkiller waterblocks, Custom loop in NZXT Phantom White, Corsair XR7 360 rad hanging off the rear end, 360 slim rad up top. RGB everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

is a 450 enough for a titan z and a fx 4300?

 

No those two components alone will draw over 450W, for a system you would want atleast 650W to give the proper overhead and efficiency. If you want to overclock the GPU and CPU ideally 750W. Also if I'm not mistaken an FX4300 may bottleneck that Titan Z 

Link to comment
Share on other sites

Link to post
Share on other sites

No those two components alone will draw over 450W, for a system you would want atleast 650W to give the proper overhead and efficiency. If you want to overclock the GPU and CPU ideally 750W. Also if I'm not mistaken an FX4300 may bottleneck that Titan Z 

ROFL. MAY bottleneck?

 

@Bajantechnician

I gotta ask... why did you buy a $2000 GPU instead of building a well balanced system?

The New Machine: Intel 11700K / Strix Z590-A WIFI II / Patriot Viper Steel 4400MHz 2x8GB / Gigabyte RTX 3080 Gaming OC w/ Bykski WB / x4 1TB SSDs (x2 M.2, x2 2.5) / Corsair 5000D Airflow White / EVGA G6 1000W / Custom Loop CPU & GPU

 

The Rainbow X58: i7 975 Extreme Edition @4.2GHz, Asus Sabertooth X58, 6x2GB Mushkin Redline DDR3-1600 @2000MHz, SP 256GB Gen3 M.2 w/ Sabrent M.2 to PCI-E, Inno3D GTX 580 x2 SLI w/ Heatkiller waterblocks, Custom loop in NZXT Phantom White, Corsair XR7 360 rad hanging off the rear end, 360 slim rad up top. RGB everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

You need the 24 PIN to turn the unit ON.

i know that...

 need extra pins to power the gpu

 

No those two components alone will draw over 450W, for a system you would want atleast 650W to give the proper overhead and efficiency. If you want to overclock the GPU and CPU ideally 750W. Also if I'm not mistaken an FX4300 may bottleneck that Titan Z 

i have a 1050

 

can i use that?

Link to comment
Share on other sites

Link to post
Share on other sites

i got a 1050 gs

 

folding

So... wait. You have a 1050 this whole time? Why not just use that? Why the whole rigamarole with hackjobbing two mediocre PSUs together?

 

 

Brain pain.

The New Machine: Intel 11700K / Strix Z590-A WIFI II / Patriot Viper Steel 4400MHz 2x8GB / Gigabyte RTX 3080 Gaming OC w/ Bykski WB / x4 1TB SSDs (x2 M.2, x2 2.5) / Corsair 5000D Airflow White / EVGA G6 1000W / Custom Loop CPU & GPU

 

The Rainbow X58: i7 975 Extreme Edition @4.2GHz, Asus Sabertooth X58, 6x2GB Mushkin Redline DDR3-1600 @2000MHz, SP 256GB Gen3 M.2 w/ Sabrent M.2 to PCI-E, Inno3D GTX 580 x2 SLI w/ Heatkiller waterblocks, Custom loop in NZXT Phantom White, Corsair XR7 360 rad hanging off the rear end, 360 slim rad up top. RGB everywhere.

Link to comment
Share on other sites

Link to post
Share on other sites

i know that...

 need extra pins to power the gpu

 

i have a 1050

 

can i use that?

 

If you have a 1050GS supernova PSU, yes that's a much better choice than using two separate GPU's.

Link to comment
Share on other sites

Link to post
Share on other sites

So... wait. You have a 1050 this whole time? Why not just use that? Why the whole rigamarole with hackjobbing two mediocre PSUs together?

 

 

Brain pain.

so i can save $300...

duh

 also im also technically not supposed to have it.............

If you have a 1050GS supernova PSU, yes that's a much better choice than using two separate GPU's.

evga 1050

Link to comment
Share on other sites

Link to post
Share on other sites

Yes there are adapters for that, many don't recommend them since the molex side of the connectionscan be overloaded at times if a poor connection occurs, Also for your 450W PSU that will be maxing it out if you have say a Titan X and an i7 CPU, what is your highest wattage PSU you have on hand:

RmxBl.png

  

Hell no.

  

So... wait. You have a 1050 this whole time? Why not just use that? Why the whole rigamarole with hackjobbing two mediocre PSUs together?

 

 

Brain pain.

bump
Link to comment
Share on other sites

Link to post
Share on other sites

As said the EVGA supernova 1050GS would work and be more than enough for the system, being much more reliable and give better power quality.

Link to comment
Share on other sites

Link to post
Share on other sites

So... wait. You have a 1050 this whole time? Why not just use that? Why the whole rigamarole with hackjobbing two mediocre PSUs together?

 

 

Brain pain.

its the thought that counts

Link to comment
Share on other sites

Link to post
Share on other sites

I have a 1050 evga, but its 200$, and im strapped for cash.

eh..

um...

no...

 

 

 

i got the superclocked version.

ur price x 2

No need to be a jerk. We're all here trying to help you. You never once mentioned that it was the superclocked variant. I was going off the info YOU provided.

 

CPU: Core i7 4970K | MOBO: Asus Z87 Pro | RAM: 32GBs of G.Skill Ares 1866 | GPU: MSI GAMING X GTX 1070 | STOR: 2 X Crucial BX100 250GB, 2 x WD Blk 1TB (mirror),WD Blk 500GB | CASE: Cooler Master HAF 932 Advanced | PSU: EVGA SUPERNOVA G2 750W | COOL: Cooler Master Hyper T4 | DISP: 21" 1080P POS | KB: MS Keyboard | MAU5: Redragon NEMEANLION | MIC: Snowball Blue | OS: Win 8.1 Pro x64, (Working on Arch for dual boot) |

Link to comment
Share on other sites

Link to post
Share on other sites

No need to be a jerk. We're all here trying to help you. You never once mentioned that it was the superclocked variant. I was going off the info YOU provided.

No need to be a jerk. We're all here trying to help you. You never once mentioned that it was the superclocked variant. I was going off the info YOU provided.

sorry if it sounded like I was being a jerk, there was no intention whatsoever
Link to comment
Share on other sites

Link to post
Share on other sites

Wait, I don't see the problem. You have a 1050w PSU, why don't you use it?????

n0ah1897, on 05 Mar 2014 - 2:08 PM, said:  "Computers are like girls. It's whats in the inside that matters.  I don't know about you, but I like my girls like I like my cases. Just as beautiful on the inside as the outside."

Link to comment
Share on other sites

Link to post
Share on other sites

Wait, I don't see the problem. You have a 1050w PSU, why don't you use it?????

so I can return it and save $200
Link to comment
Share on other sites

Link to post
Share on other sites

so I can return it and save $200

Save 200$, but increase chances of breaking you 2000$ gpu

n0ah1897, on 05 Mar 2014 - 2:08 PM, said:  "Computers are like girls. It's whats in the inside that matters.  I don't know about you, but I like my girls like I like my cases. Just as beautiful on the inside as the outside."

Link to comment
Share on other sites

Link to post
Share on other sites

I don't see how you can increase your power output without increasing current.

Power = Voltage X Current

Voltage is fixed; it CANNOT be changed.

The entire system relies on +12v, +5v, and +3.3v, and is down-converted by the motherboard / system where necessary.

You can't feed +24v...random +15v into your system.

That is the job for a large portion of the PSU's internal components -- maintain, a smooth, and consistent +12v, +5v, and +3.3v as possible by supressing ripple, and electrical noise.

Since you are not allowed to increase voltage, then the only other option is to increase current.

That is how PSU's are rated.

Modern computer systems rely on +12v power source; hence, PSU's these days are rated mainly by their +12v output capability.

EVGA GS 550 (550W): 45A (amperage; current) on the +12v rail. 12V X 45A = 540W.

EVGA GS 1050 (1050W): 87A on the +12v rail. 1044W

You can connect two Power Supplies in parallel so the voltage remains constant, but the current is summed.

Essentially, the cable @W-L mentioned helps to achieve.

Then again, a few have already mentioned, I don't know WHY you want to put your entire system at risk, let alone your expensive Titan X, because of the power supply. The power supply is one of the MOST important component in any computer system. We mention it here, so does Linus, Slick, and a bunch of other computer techies say, you do not "cheap out" on the power supply. It is essentially the backbone of your PC.

(Middle school / High School Physics / Science, bruh!)

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites

Link to post
Share on other sites

I don't see how you can increase your power output without increasing current.

Power = Voltage X Current

Voltage is fixed; it CANNOT be changed.

The entire system relies on +12v, +5v, and +3.3v, and is down-converted by the motherboard / system where necessary.

You can't feed +24v...random +15v into your system.

That is the job for a large portion of the PSU's internal components -- maintain, a smooth, and consistent +12v, +5v, and +3.3v as possible by supressing ripple, and electrical noise.

Since you are not allowed to increase voltage, then the only other option is to increase current.

That is how PSU's are rated.

Modern computer systems rely on +12v power source; hence, PSU's these days are rated mainly by their +12v output capability.

EVGA GS 550 (550W): 45A (amperage; current) on the +12v rail. 12V X 45A = 540W.

EVGA GS 1050 (1050W): 87A on the +12v rail. 1044W

You can connect two Power Supplies in parallel so the voltage remains constant, but the current is summed.

Essentially, the cable @W-L mentioned helps to achieve.

Then again, a few have already mentioned, I don't know WHY you want to put your entire system at risk, let alone your expensive Titan X, because of the power supply. The power supply is one of the MOST important component in any computer system. We mention it here, so does Linus, Slick, and a bunch of other computer techies say, you do not "cheap out" on the power supply. It is essentially the backbone of your PC.

(Middle school / High School Physics / Science, bruh!)

ok

thx

installed the 1050 supernova

:)

YAY!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×