How to equalize two devices at the same time using Equalizer APO with Peace

[yn404]

Recently got myself a new microphone and for quite some time I can't understand, how do I put config on my headphones AND on my microphone at the same time. As far as I know EqualizerAPO allows such things?

Any tips on possible solution to this problem? Would appreciate any help!

[SImoHayha]

32 minutes ago, yn404 said:

 

Oh this is easy. You have to place the device in another slot like so..

 

Basically install EPO for all of devices you want both headphone + microphone.

edit only on the default config.txt that's what I do and it's the easiest.

Then you see slot one?  Basically you select headphones here, if you don't see it

Select the green + sign > control > device > Then select device headphones

anything you do for the headphones won't affect the microphone. Only the things you do beneath it will influence the top device. Then when you select another device such as microphones only the numbers below it will influence it.


Select the green + sign > control > device > Then select device microphone

 

anything you do below the microphone will only affect the microphone.


so in my example
number 1: Is device headphones, only values 2 through 5 influence headphones.
number 6 is device microphones, only values 7-8 influence microphone

 

[yn404]

11 minutes ago, Ramamataz said:

Oh this is easy. You have to place the device in another slot like so..

 

Basically install EPO for all of devices you want both headphone + microphone.

edit only on the default config.txt that's what I do and it's the easiest.

Then you see slot one?  Basically you select headphones here, if you don't see it

Select the green + sign > control > device > Then select device headphones

anything you do for the headphones won't affect the microphone. Only the things you do beneath it will influence the top device. Then when you select another device such as microphones only the numbers below it will influence it.


Select the green + sign > control > device > Then select device microphone

 

anything you do below the microphone will only affect the microphone.


so in my example
number 1: Is device headphones, only values 2 through 5 influence headphones.
number 6 is device microphones, only values 7-8 influence microphone

 

Thank you so much! That helped a lot! Turns out I don't need to use peace anymore