My loop is running alitte hot

[chaotic kronos]

My cpu is I9 7920x and gpu is 3080ti both water cooled . I got 360 and 280 rads and CoolerMaster halo fans . My loop runs between 37 to 46 c . The pump is fine and iam put of ideas do I need more rads . Iam running distilled water with primochill utopia 

 

 

 

 

 

 

 

 

[NorKris]

picture? 

[chaotic kronos]

1 minute ago, NorKris said:

picture? 

Iam not at my house atm . When I get back I will take some pictures and send them

[NorKris]

ok other helpfull stuff that is needed:

- CPU temp when  Prime95 or cinebench r23:

- GPU temp when furmark: 

- Watt load on the components: 

- where is the Temp sensor that says 46?: 

- Speed of the fans?: 

 

[chaotic kronos]

15 minutes ago, NorKris said:

ok other helpfull stuff that is needed:

- CPU temp when  Prime95 or cinebench r23:

- GPU temp when furmark: 

- Watt load on the components: 

- where is the Temp sensor that says 46?: 

- Speed of the fans?: 

 

Cpu goes to 95 or 100 c .gpu 50 to 60c  idk watt of cpu but gpu is 440. There is 2 temp sensors 1 is on the pump and other is in the loop that g1/4 temp sensors. Fan is on a curve on water temp to be at 100% when  loop temp hits 40 c. Fan 120 fan 1800 rpm and 140 is 1600 . I got 3 140 and 4 120 fans

[Konbn]

56 minutes ago, chaotic kronos said:

My cpu is I9 7920x and gpu is 3080ti both water cooled . I got 360 and 280 rads and CoolerMaster halo fans . My loop runs between 37 to 46 c . The pump is fine and iam put of ideas do I need more rads . Iam running distilled water with primochill utopia 

 

 

 

 

 

 

 

 

coolermaster halo fans are not good for rads, yes they look the best, but have trouble with pulling air trough rads

[chaotic kronos]

13 minutes ago, Konbn said:

coolermaster halo fans are not good for rads, yes they look the best, but have trouble with pulling air trough rads

Really . Well that 7 fans to the axe if that is the issue

[NorKris]

8 minutes ago, chaotic kronos said:

Really . Well that 7 fans to the axe if that is the issue

fans make 2-5c diff, not much more. 

 

give us screenshot of the watt when doing tests. 440 is very high

[PDifolco]

47 minutes ago, chaotic kronos said:

Cpu goes to 95 or 100 c .gpu 50 to 60c  idk watt of cpu but gpu is 440. There is 2 temp sensors 1 is on the pump and other is in the loop that g1/4 temp sensors. Fan is on a curve on water temp to be at 100% when  loop temp hits 40 c. Fan 120 fan 1800 rpm and 140 is 1600 . I got 3 140 and 4 120 fans

What's the PPT of your 7920X ? It can go crazy high on OC like 400W

That and a 440W GPU make a total power of 1000W near impossible to cool

 

[chaotic kronos]

48 minutes ago, PDifolco said:

What's the PPT of your 7920X ? It can go crazy high on OC like 400W

That and a 440W GPU make a total power of 1000W near impossible to cool

 

Am I missing some things people r water cooling 4090 which is from 450 to 500 watt . What is ppt . Cpu is stock no overclock is applied it's tdp is 150 w so like at most it would go to 250 watt and that is an exaggeration 

[PDifolco]

1 hour ago, chaotic kronos said:

Am I missing some things people r water cooling 4090 which is from 450 to 500 watt . What is ppt . Cpu is stock no overclock is applied it's tdp is 150 w so like at most it would go to 250 watt and that is an exaggeration 

Not many people have a CPU able to eat 400W  

PPT is full CPU+socket power, but if it's max 150W then something is wrong in your loop

[chaotic kronos]

37 minutes ago, PDifolco said:

Not many people have a CPU able to eat 400W  

PPT is full CPU+socket power, but if it's max 150W then something is wrong in your loop

150 is not max its the listed tdp. Idk what to think  there is no crazy bends. The flow in the loop is good. There is a flow meter in pump 

Edited March 6, 2023 by chaotic kronos