Show off Your Setup! (Rev.2)

[Not_Dharsh]

Pc:

Cooler Master NR200p

Ryzen 5 5600x

ROG Strix X570i (mini ITX)

TUF gaming GTX 1660Ti 6gb OC

WD Black 4tb HDD

Stock AMD CPU cooler

3 Arctic P12 PWM PST aRGB 120mm fans

Cooler Master 850w Gold rated PSU

XPG GAMMIX S11 Pro M.2

Corsair Vengeance 1x16 RAM (getting another one soon)

 

The monitor is an old 1080p 60hz TV

 

Keyboard: Royal Kludge RK100 RGB

Mouse: Logitech G502 hero

Speakers: Swans D1080 MkII

I got new headphones, Marshall Major IV

 

 

 

[Philip Kapadia]

On 3/28/2024 at 2:37 PM, ThatOwlyBoy said:

I wouldn't be expecting to see you at The Media Production & Technology Show near the Avid stall by any chance would I?

I will see you there! lol

[CDR_Xavier]

I just realized that I have indeed populated every single slot.

Does that mean my system now quality as "baller system"?

 

Also. OPEN BACK SLOTS. Why are board manufacturer so stupid

just open-back everything so you don't have to put x16 in everything, see I even made it cheaper for you. Now hire me.

[Capt_Monk]

First Build

12600kf

4060

16gb G. Skill Ripjaws V

1tb Sn850x

Thermalright PA SE

Corsair RM750e

Z790-p WIFI ddr4

Montech X3 Mesh

 

Acer 165hz 24inch 1080p monitor

Glorious Model O 2

Razer Ornata V3

Razer Blackshark V2

[Willbot750]

Roast my setup lol. And yes, its running off the ally lol.

[gentlemanspot]

Ok so i have a laptop and desktop blah blah blah, But the build i want to show off is my e-waste NAS 

I have randomly been collecting parts from here and there till I had enough. 

 

basically im too cheap /stubborn to buy an off the shelf NAS 

 

Vault - 77 - A box full of puppets! 

 

 

The Parts: 

Case:  corsair ammo box looking bad boy I found on the side of the road (lightly rained on) 

Mobo and CPU: Pulled from an old gaming pc i5-4690K (can be overclocked, It was) with an ASRock gaming Mobo

Ram:  Mismatching kits:  Hyper - x 2x 8gb bell 2x 8gb = 32GB speed is just a number 

GPU: E-waste dumpster Nvidia Quda P1000 ripped out of an old Hp Z workstation 

HDD:  256 M.2 SSD from a HP workstation

            5x  12 TB SAS drives Pull from an old SAN that had failed there was 7 drives but 2 DOA 

HBA:  LSI 9240-8I 6Gbps SAS HBA 9211-8I IT  for Aliexpress (cost me about 50 Dolloradoos (AU))

* i had to Kapton tape the 3.3v pins to get the drives to run! 

CPU COOLER: Corsair AIO came with the guts  

PSU: Works! 

FANS: Got a bunch from a garage sale! jammed them in where i could 

 

 

Now i know it looks like a mess, that is cos well it is! But it works and i am not going to mess with the eco system of the rainforest~! 

 

The plan! 

 

Next upgrade will be a 4 port NIC and a decent PSU as well as adding more drives! 

 

at some stage i will clean out the case and 3d print more HDD bays! 

i have a box of random fans so i might improve airflow but the HBA cables prevent the side panel going on! for now it just chills in my HomeLab! 

 

 

 

 

 

 

 

 

 

 

[XZDX]

2 minutes ago, gentlemanspot said:

Ok so i have a laptop and desktop blah blah blah, But the build i want to show off is my e-waste NAS 

I have randomly been collecting parts from here and there till I had enough. 

 

basically im too cheap /stubborn to buy an off the shelf NAS 

 

Vault - 77 - A box full of puppets! 

 

 

The Parts: 

Case:  corsair ammo box looking bad boy I found on the side of the road (lightly rained on) 

Mobo and CPU: Pulled from an old gaming pc i5-4690K (can be overclocked, It was) with an ASRock gaming Mobo

Ram:  Mismatching kits:  Hyper - x 2x 8gb bell 2x 8gb = 32GB speed is just a number 

GPU: E-waste dumpster Nvidia Quda P1000 ripped out of an old Hp Z workstation 

HDD:  256 M.2 SSD from a HP workstation

            5x  12 TB SAS drives Pull from an old SAN that had failed there was 7 drives but 2 DOA 

HBA:  LSI 9240-8I 6Gbps SAS HBA 9211-8I IT  for Aliexpress (cost me about 50 Dolloradoos (AU))

* i had to Kapton tape the 3.3v pins to get the drives to run! 

CPU COOLER: Corsair AIO came with the guts  

PSU: Works! 

FANS: Got a bunch from a garage sale! jammed them in where i could 

 

 

Now i know it looks like a mess, that is cos well it is! But it works and i am not going to mess with the eco system of the rainforest~! 

 

The plan! 

 

Next upgrade will be a 4 port NIC and a decent PSU as well as adding more drives! 

 

at some stage i will clean out the case and 3d print more HDD bays! 

i have a box of random fans so i might improve airflow but the HBA cables prevent the side panel going on! for now it just chills in my HomeLab! 

 

 

 

 

 

 

 

 

 

 

Can you get a geiger counter strapped to the inside of that

[gentlemanspot]

Just now, XZDX said:

Can you get a geiger counter strapped to the inside of that

Yeah, i could but i don't need to beeping! 

[XZDX]

1 minute ago, gentlemanspot said:

Yeah, i could but i don't need to beeping! 

But you don't understand

 

We Do

[FireyFoxiconnRageEX]

[XZDX]

 

SLI K4200's, 

[gentlemanspot]

40 minutes ago, XZDX said:

 

SLI K4200's, 

oooh HP Z type! 

[thrasher_565]

horrible...

Edited Monday at 02:34 PM by thrasher_565

[XZDX]

6 hours ago, gentlemanspot said:

oooh HP Z type! 

Nope, I fucked with it until it forcefully started working LOL

[TatamiMatt]

22 minutes ago, XZDX said:

Nope, I fucked with it until it forcefully started working LOL

if the drivers and hardware supports it turn on resizeable bar, you should see an even further increase to performance

[XZDX]

2 minutes ago, TatamiMatt said:

if the drivers and hardware supports it turn on resizeable bar, you should see an even further increase to performance

X79 doesn't do that.  While it does have rebar tooling, its later boards that theres a toggle for it.  On the one I have, it just autoallocates all the possible bar space that is needed.  The GPU's are getting fed another 20GB of ram, so I'm not sure the extra 2GB from the intel rebar suite would do a whole lot.

[freeagent]

Currently..

 

[XZDX]

2 minutes ago, freeagent said:

Currently..

 

I enjoy that PSU shroud.  Good air design in that case.

[XZDX]

Post thermosyphons plz

[freeagent]

Just now, XZDX said:

I enjoy that PSU shroud.  Good air design in that case.

Yessir, it pushes air from the front down on the the rest of the parts, works great!

[XZDX]

Guy left moms house and now lives in a storage unit

[gentlemanspot]

1 hour ago, XZDX said:

Nope, I fucked with it until it forcefully started working LOL

But it has parts from a Z Workstation yeah? I mean feels HP Z-ish with the Xeon and  Quadro haha  

[XZDX]

20 minutes ago, gentlemanspot said:

But it has parts from a Z Workstation yeah? I mean feels HP Z-ish with the Xeon and  Quadro haha  

I'm using an Asus P9X79LE, whatever ram I have laying around, theres a Audigy ZS2, the 2 K4200's, 2690, cooled by the cooler that came with my 3900X btw just sitting on the socket

 

gimme a bit.  I might post a pic if its not a huge pain in the arse

 

If I had an HP I'd have a Grid K2 in there as well.

[Needfuldoer]

15 hours ago, Willbot750 said:

Roast my setup lol. And yes, its running off the ally lol.

[ Merged with the Show Off Your Setup megathread ]

[gentlemanspot]

16 hours ago, Willbot750 said:

Roast my setup lol. And yes, its running off the ally lol.

I mean you went through all that effort and didn't change the wallpaper! Boom! roasted!