Jump to content

Turning a Samsung Evo 870 from internal to external - same performance?

Haveri

Hello everyone,

I currently have a Samsung EVO 870 2TB, internal. This is regular SSD, not nvme. I would like to turn it into an external drive and as far as I know that's possible with a special cable.

My question is, since I really depend on its speed and performance, will it be slower? What I thought is to use USB type C, is it a good idea? If it's somewhat slower then I'd better just get a new one instead.

Thanks a lot in advance!

Link to comment
Share on other sites

Link to post
Share on other sites

A regular SATA to USB enclosure should do the job.

 

Theoretically it's going to be slower because it will be connected to USB, but it's still going to be faster than cheap flash drives.

I sold my soul for ProSupport.

Link to comment
Share on other sites

Link to post
Share on other sites

It will be mostly dependent on the enclosure you purchase.

Win10 - AMD 5800X, GIGABYTE X570 Aorus Elite, RX 6800XT Midnight Black, Corsair Vengeance Pro 32GB, ARCTIC Liquid Freezr II 360-ARGB, Sabrent Rocket Q 2TB, Cooler Master V850, Fractal Design Meshify 2

unRAID - AMD 1700X, GIGABYTE B450 Aorus Pro, Corsair Vengeance LPX 16GB, Noctua NH-D9L, WD Red 4TB x3, WD Green 2TB, Intel 160GB SSD, Seasonic S12III 550W, Fractal Design Node 605

pfSense - Intel i5 4570S, ASUS H97I-PLUS, Samsung Green 8GB, Zalman CNPS80G, WD Scorpio Blue 320GB, EVGA SuperNova GA 550W, Fractal Design Node 304

Link to comment
Share on other sites

Link to post
Share on other sites

Sata III has a speed of 6.0Gbps and USB 3.1 is 10Gbps, as long as you find an external closure with usb 3.1 it should be the same.  If you get a USB 3 (4.8Gbps) external enclosure it'll be a tad slower than when you had the drive installed internally.

Desktop: Intel i7-13700K / Asus ROG Strix  z690-e / Nvidia 4080 FE / 32GB DDR5 Corsair Dominator / 2TB  WD SN850x  / 48" Lg C2 & 27" Asus ProArt

Plex Server: Dell OptiPlex 7010 /  i7-13700 /  32GB DDR5 / 1TB Samsung  990 Pro / Ubuntu

Laptop: M2 Macbook Air / 8G ram / 8core CPU / 10core GPU / 512GB SSD

NAS: Synology 1821+ , 2x Synology RS819 = 200TB 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Needfuldoer said:

A regular SATA to USB enclosure should do the job.

 

Theoretically it's going to be slower because it will be connected to USB, but it's still going to be faster than cheap flash drives.

Thanks that's interesting, and if I connect it through thunderbolt will it be at the same speed? I don't even have a thunderbold connection but maybe it's an opportunity to buy a motherboard that supports it.
Thanks in advance 

Link to comment
Share on other sites

Link to post
Share on other sites

Oh alright so I just need a closure with USB 3.1 then? I will try that thanks a lot

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, Haveri said:

Hello everyone,

I currently have a Samsung EVO 870 2TB, internal. This is regular SSD, not nvme. I would like to turn it into an external drive and as far as I know that's possible with a special cable.

My question is, since I really depend on its speed and performance, will it be slower? What I thought is to use USB type C, is it a good idea? If it's somewhat slower then I'd better just get a new one instead.

Thanks a lot in advance!

Hello,

 

I have an 870 EVO 1TB that I'm using as an external SSD. I'm using an Adata EX500 with USB 3.1 and I get about 330-350 mb/s write. So, a bit of a performance hit, but nothing too crazy for me.

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, Cypher64 said:

Sata III has a speed of 6.0Gbps and USB 3.1 is 10Gbps, as long as you find an external closure with usb 3.1 it should be the same.  If you get a USB 3 (4.8Gbps) it'll be a tad slower than when you had the drive installed internally.

My mother board has two ports of "USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity"
And one of "USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity"
Which should I get then?
Or it doesn't matter?

Thanks a lot

Link to comment
Share on other sites

Link to post
Share on other sites

7 minutes ago, Haveri said:

My mother board has two ports of "USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity"
And one of "USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity"
Which should I get then?
Or it doesn't matter?

Thanks a lot

At that point it's just splitting hairs.

 

Don't worry about theoretically bottlenecking the drive, it's going to be plenty fast regardless. (Just don't get a USB 2.0 enclosure.)

I sold my soul for ProSupport.

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Haveri said:

My mother board has two ports of "USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity"
And one of "USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity"
Which should I get then?
Or it doesn't matter?

Thanks a lot

 

Look for an external enclosure that is greater than the Sata3 speed (6Gbps) and you should be fine. Whether it's use 3.1 or 3.2 is totally your preference

Desktop: Intel i7-13700K / Asus ROG Strix  z690-e / Nvidia 4080 FE / 32GB DDR5 Corsair Dominator / 2TB  WD SN850x  / 48" Lg C2 & 27" Asus ProArt

Plex Server: Dell OptiPlex 7010 /  i7-13700 /  32GB DDR5 / 1TB Samsung  990 Pro / Ubuntu

Laptop: M2 Macbook Air / 8G ram / 8core CPU / 10core GPU / 512GB SSD

NAS: Synology 1821+ , 2x Synology RS819 = 200TB 

Link to comment
Share on other sites

Link to post
Share on other sites

46 minutes ago, Haveri said:

My mother board has two ports of "USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity"
And one of "USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity"
Which should I get then?
Or it doesn't matter?

Thanks a lot

 

USB naming is fun. The USB forum changed the name of USB 3.0 and 3.1 multiple times in the past. Here is the current correct naming, including the old naming and their speeds:

 

Speed - Current Name (Old name)

 

05Gb/s - USB 3.2 Gen 1 (USB 3.0, 3.1 Gen 1)

10Gb/s - USB 3.2 Gen 2 (USB 3.1 Gen2)

20Gb/s - USB 3.2 Gen 2x2 

40Gb/s - USB 4.0

 

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×