PSU and Monitor Mains cable not going in fully

[dani.petro]

Hi, 

The power cable for my monitor and psu are not going inside the female port completely. Please see attached pics.

 

They are working fine and are pretty tightly inserted and have no play if moved.

 

Is this a matter of worry or is this normal as the cable's are mass manufactured.

[Wohaaa]

If they're not coming loose or shaking, and give the proper electricity, then it's fine. That's probably just margin of error with cables and slots, you don't have to worry about it unless it just comes off randomly or is shaky.

[dani.petro]

2 minutes ago, Wohaaa said:

If they're not coming loose or shaking, and give the proper electricity, then it's fine. That's probably just margin of error with cables and slots, you don't have to worry about it unless it just comes off randomly or is shaky.

They are quite tight. The monitor one specially is extra tight and needs quite a bit of elbow grease to break loose and pull out. The PSU is also tight but not as much as the monitor.

[Wohaaa]

1 minute ago, dani.petro said:

They are quite tight. The monitor one specially is extra tight and needs quite a bit of elbow grease to break loose and pull out. The PSU is also tight but not as much as the monitor.

Then you have absolutely nothing to worry about, this is normal

[Guest]

Do you live near a facility that manufactures concrete?

 

[dani.petro]

40 minutes ago, jonnyGURU said:

Do you live near a facility that manufactures concrete?

 

Nah but I live near the Airport and major highway of my city.

If you are talking about the dust on the monitor, it was not cleaned for a year