CPU fan error

[AvidSquidd]

Recently installed NZXT Kraken X63 on my ASUS ROX X570 E mother board and on boot i get CPU fan error message.(AMD Ryzen 3800X)

I followed all the internet fixes:

1. Check the fan ports on mother board

2. "Ignore" CPU Fan speed in Bios

3. CMOS reset

4. Remove battery

 

None of it worked,

 

Please help!

Edited February 13, 2022 by AvidSquidd

[AvidSquidd]

2 minutes ago, AvidSquidd said:

BiOS version: 1407 x64

 

Edited February 13, 2022 by AvidSquidd

[da na]

Welcome to the forums!

Tried swapping whatever fan is on your CPU with a different one in the case? 

Is this a new build, first boot, and you're getting this issue; or is it a build you've had for a while and just now this is happening? 

[AvidSquidd]

15 minutes ago, Mel0nMan said:

Welcome to the forums!

Tried swapping whatever fan is on your CPU with a different one in the case? 

Is this a new build, first boot, and you're getting this issue; or is it a build you've had for a while and just now this is happening? 

I had this build for 2 years, I just switched from NZXT Kraken M22 to NZXT Kraken X63. First boot after switching to the new CPU cooler and i have this error. 

[da na]

5 minutes ago, AvidSquidd said:

I had this build for 2 years, I just switched from NZXT Kraken M22 to NZXT Kraken X63. First boot after switching to the new CPU cooler and i have this error. 

Ah. Sure your fan is on the correct pins? 

[AvidSquidd]

Just now, Mel0nMan said:

Ah. Sure your fan is on the correct pins? 

I tried every pin, swapped it to every pin available :(. Been at this for hours.

[da na]

1 minute ago, AvidSquidd said:

I tried every pin, swapped it to every pin available :(. Been at this for hours.

If you put on the M22 does it work? AIO could be drawing too much power

[AvidSquidd]

Just now, Mel0nMan said:

If you put on the M22 does it work? AIO could be drawing too much power

Let me that, switching to M22.

[AvidSquidd]

2 minutes ago, Mel0nMan said:

If you put on the M22 does it work? AIO could be drawing too much power

I have the COrsair RM 750X PSU, FYO. Thanks for replying.

[da na]

1 minute ago, AvidSquidd said:

I have the COrsair RM 750X PSU, FYO. Thanks for replying.

Ah, not too much power from the PSU but rather from the motherboard which the PSU doesn't control the fan header power. You've tried just setting it to max speed in the BIOS right? and it won't let you boot so you can't use 3rd party programs, correct?

[AvidSquidd]

4 minutes ago, Mel0nMan said:

Ah, not too much power from the PSU but rather from the motherboard which the PSU doesn't control the fan header power. You've tried just setting it to max speed in the BIOS right? and it won't let you boot so you can't use 3rd party programs, correct

Sorry, does that mean its not a Power issue?

[da na]

7 minutes ago, AvidSquidd said:

Sorry, does that mean its not a Power issue?

PSU power delivery and motherboard power delivery are different. It's not an issue with your PSU or your motherboard, eg neither are broken, but it's an issue that might be caused by your motherboard.

[AvidSquidd]

43 minutes ago, AvidSquidd said:

I have the COrsair RM 750X PSU, FYO. Thanks for replying.

Just switched to M22 cooler and i am having the same issue 

[AvidSquidd]

14 minutes ago, AvidSquidd said:

Just switched to M22 cooler and i am having the same issue 

No i was able log into windows finally with the M22 cooler

[Frizz]

9 hours ago, AvidSquidd said:

Recently installed NZXT Kraken X63 on my ASUS ROX X570 E mother board and on boot i get CPU fan error message.(AMD Ryzen 3800X)

I followed all the internet fixes:

1. Check the fan ports on mother board

2. "Ignore" CPU Fan speed in Bios

3. CMOS reset

4. Remove battery

 

None of it worked,

 

Please help!

Ok so maybe I am asking the really dumb question. But just making sure, you are using these top right area fan headers, making sure the fan cable connects to the header on 2 on the left side. Correct?

 

[AvidSquidd]

5 hours ago, Frizz said:

Ok so maybe I am asking the really dumb question. But just making sure, you are using these top right area fan headers, making sure the fan cable connects to the header on 2 on the left side. Correct?

 

Yup, I had it connected on the correct one. When it dint work i tried rest of the fan ports too. 

[Frizz]

51 minutes ago, AvidSquidd said:

Yup, I had it connected on the correct one. When it dint work i tried rest of the fan ports too. 

Darn, wondering if that header is failing then. Especially since your old one does it now too. Best of wishes