Jump to content

"PAGE FAULT IN NON-PAGED AREA"

suraj ranjan

Hello everyone, 
Just few mins ago, I got this BSOD error on my PC, this is first time, I am not sure why. I also saw under the error code, like "WHAT STOPPED: K7SENTRY.SYS" was displayed.
I checked several videos on YT, many suggested to uncheck the automatically managed pagefile and set to no paging file but the settings I have is, I have enabled 'system managed size'..I was confused if I should set it 'no paging file' and btw I have 16gb ram installed..
Also one more thing I noticed was, usually I put the system to sleep if I am away for sometime, when I came back and turned on the system, I lighting of case fans didn't on, every time it would turn on and after using the browser for few mins I got this BSOD error..
I would like to hear the reasons why this happened and solutions to avoid getting the error again.
Thank you.

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, aDoomGuy said:

Most likely RAM error. Run memtest.

Okay, will do.. 
Also someone please clarify me on the pagefile thing, like what should be the exact setting be?

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, suraj ranjan said:

Okay, will do.. 
Also someone please clarify me on the pagefile thing, like what should be the exact setting be?

Automatic.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!dId i WiN teH SiLiCON LotTerrYyOu ShoUlD dEsHrOuD uR GPUmy SYstEm iS UNDerPerforMiNg iN WarzONEcan mY Pc Run WiNdOwS 11 ?woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites

Link to post
Share on other sites

4 minutes ago, suraj ranjan said:

Also someone please clarify me on the pagefile thing, like what should be the exact setting be?

Leave it as auto managed. If you turn it off and you use up all your RAM, Windows will hard-crash. It's basically a buffer should some program misbehave and allocate all your RAM.

Main System (Byarlant): Ryzen 7 5800X | Asus B550-Creator ProArt | EK 240mm Basic AIO | 16GB G.Skill DDR4 3200MT/s CAS-14 | XFX Speedster SWFT 210 RX 6600 | Samsung 990 PRO 2TB / Samsung 960 PRO 512GB / 4× Crucial MX500 2TB (RAID-0) | Corsair RM750X | a 10G NIC (pending) | Inateck USB 3.0 Card | Hyte Y60 Case | Dell U3415W Monitor | Keychron K4 Brown (white backlight)

 

Laptop (Narrative): Lenovo Flex 5 81X20005US | Ryzen 5 4500U | 16GB RAM (soldered) | Vega 6 Graphics | SKHynix P31 1TB NVMe SSD | Intel AX200 Wifi (all-around awesome machine)

 

Proxmox Server (Veda): Ryzen 7 3800XT | AsRock Rack X470D4U | Corsair H80i v2 | 64GB Micron DDR4 ECC 3200MT/s | 4x 10TB WD Whites / 4x 14TB Seagate Exos / 2× Samsung PM963a 960GB SSD | Seasonic Prime Fanless 500W | Intel X540-T2 10G NIC | LSI 9207-8i HBA | Fractal Design Node 804 Case (side panels swapped to show off drives) | VMs: TrueNAS Scale; Ubuntu Server (PiHole/PiVPN/NGINX?); Windows 10 Pro; Ubuntu Server (Apache/MySQL)


Media Center/Video Capture (Jesta Cannon): Ryzen 5 1600X | ASRock B450M Pro4 R2.0 | Noctua NH-L12S | 16GB Crucial DDR4 3200MT/s CAS-22 | EVGA GTX750Ti SC | UMIS NVMe SSD 256GB / TEAMGROUP MS30 1TB | Corsair CX450M | Viewcast Osprey 260e Video Capture | Mellanox ConnectX-2 10G NIC | LG UH12NS30 BD-ROM | Silverstone Sugo SG-11 Case | Sony XR65A80K

 

Camera: Sony ɑ7II w/ Meike Grip | Sony SEL24240 | Samyang 35mm ƒ/2.8 | Sony SEL50F18F | Sony SEL2870 (kit lens) | PNY Elite Perfomance 512GB SDXC card

 

Network:

Spoiler
                           ┌─────────────── Office/Rack ────────────────────────────────────────────────────────────────────────────┐
Google Fiber Webpass ────── UniFi Security Gateway ─── UniFi Switch 8-60W ─┬─ UniFi Switch Flex XG ═╦═ Veda (Proxmox Virtual Switch)
(500Mbps↑/500Mbps↓)                             UniFi CloudKey Gen2 (PoE) ─┴─ Veda (IPMI)           ╠═ Veda-NAS (HW Passthrough NIC)
╔═══════════════════════════════════════════════════════════════════════════════════════════════════╩═ Narrative (Asus USB 2.5G NIC)
║ ┌────── Closet ──────┐   ┌─────────────── Bedroom ──────────────────────────────────────────────────────┐
╚═ UniFi Switch Flex XG ═╤═ UniFi Switch Flex XG ═╦═ Byarlant
   (PoE)                 │                        ╠═ Narrative (Cable Matters USB-PD 2.5G Ethernet Dongle)
                         │                        ╚═ Jesta Cannon*
                         │ ┌─────────────── Media Center ──────────────────────────────────┐
Notes:                   └─ UniFi Switch 8 ─────────┬─ UniFi Access Point nanoHD (PoE)
═══ is Multi-Gigabit                                ├─ Sony Playstation 4 
─── is Gigabit                                      ├─ Pioneer VSX-S520
* = cable passed to Bedroom from Media Center       ├─ Sony XR65A80K (Google TV)
** = cable passed from Media Center to Bedroom      └─ Work Laptop** (Startech USB-PD Dock)

Retired/Other:

Spoiler

Laptop (Rozen-Zulu): Sony VAIO VPCF13WFX | Core i7-740QM | 8GB Patriot DDR3 | GT 425M | Samsung 850EVO 250GB SSD | Blu-ray Drive | Intel 7260 Wifi (lived a good life, retired with honor)

Testbed/Old Desktop (Kshatriya): Xeon X5470 @ 4.0GHz | ZALMAN CNPS9500 | Gigabyte EP45-UD3L | 8GB Nanya DDR2 400MHz | XFX HD6870 DD | OCZ Vertex 3 Max-IOPS 120GB | Corsair CX430M | HooToo USB 3.0 PCIe Card | Osprey 230 Video Capture | NZXT H230 Case

TrueNAS Server (La Vie en Rose): Xeon E3-1241v3 | Supermicro X10SLL-F | Corsair H60 | 32GB Micron DDR3L ECC 1600MHz | 1x Kingston 16GB SSD / Crucial MX500 500GB

Link to comment
Share on other sites

Link to post
Share on other sites

55 minutes ago, suraj ranjan said:

Okay, will do.. 
Also someone please clarify me on the pagefile thing, like what should be the exact setting be?

default settings 

The direction tells you... the direction

-Scott Manley, 2021

 

Softwares used:

Corsair Link (Anime Edition) 

MSI Afterburner 

OpenRGB

Lively Wallpaper 

OBS Studio

Shutter Encoder

Avidemux

FSResizer

Audacity 

VLC

WMP

GIMP

HWiNFO64

Paint

3D Paint

GitHub Desktop 

Superposition 

Prime95

Aida64

GPUZ

CPUZ

Generic Logviewer

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Also some applications appear to expect to be run on a system with page file, disabling it may cause them to crash even with available RAM.

Link to comment
Share on other sites

Link to post
Share on other sites

I did the above and today still I got the BSOD with the same error, then ran the memory test again, no issues, later I checked for the driver, there was a update, when I tried installing I got the BSOD, it was stuck in BSOD, had to hard shut it down, logged in tried updating and got the BSOD again..So the whole problem is with the driver I guess, but I am not able to update it, what do I do?

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×