NZXT H1 Water Cooling done :)

[shaz2sxy]

So eventually finished my Watercooling system in the NZXT H1,

 

Wasn't too bad

 

Spec

- Barrow Pump/Reservoir combo - LTPRPA-04

- EKWB Vector with back plate

- Corsair XR5 280mm Radiator

- Barrow 90 rotary fittings

- Barrow 180 zigzag fittings (Radiator)

- Mayhem 10/16 clear tubing

- Mayhem X1 fluid

- Arctic P14 fans

 

Temps under load

- 5600x - 55c

- 3070FE - 60c

 

Need to adjust the pump/fan speeds to get the best noise to cooling ratio so probably better temps soon

[Dedayog]

Would be a good post in Build Logs, so people can peruse.  Nice work.

[fonzz1e]

30 minute stress test temps?

[shaz2sxy]

 

5 hours ago, fonzz1e said:

30 minute stress test temps?

Currently folding and constant 55c temps.

 

What would you recommend for stress test

[fonzz1e]

1 hour ago, shaz2sxy said:

 

Currently folding and constant 55c temps.

 

What would you recommend for stress test

prime95 small fft + unigine heaven

monitor your temps while they're running

 

that you'll know if your current cooling solution is sufficient for both cpu + gpu

 

I like to stress test my new loop since my tropical ambient temp is quite high (31 to 35c)

[shaz2sxy]

11 minutes ago, fonzz1e said:

prime95 small fft + unigine heaven

monitor your temps while they're running

 

that you'll know if your current cooling solution is sufficient for both cpu + gpu

 

I like to stress test my new loop since my tropical ambient temp is quite high (31 to 35c)

Thanks, will give it a go over the weekend

[Jedaro004]

d*mb questions but is it hard to change liquide? and where do you drain it? 

 

thanks and beautiful build