Posted April 6, 2014 Author Already done. Its not that hard of a job actually. As I'm monitoring racks 1-4 with a total of 32 cards and 128 concurrent games, all I need to do is sit back and stare at way too many streams. I have also set up some alarms that go off whenever throughput quality dips below a certain point on any one of the games. Currently, everything is running fine and the server is at its low point with only 49 games being played, all with extremely high quality streams. Time to kick back and play some games. Good job! I will increase your salary to 250 LSC/week. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Aww I want your job! When you get off work, you can come and join in the fun. Also, there are 4 PLX chips that I'm in charge of and I can't be at all of them at once (that is why I have alarms set up for each one) If you ever need some place to host some kind of party, I'll let you use one! Good job! I will increase your salary to 250 LSC/week. Thanks for the raise! NEW BUILD LOG!!!: Project Comilinx http://linustechtips.com/main/topic/313532-in-progress-project-comilinx-side-panel-modpainting-update-1932015/ Other build: Project Impracticality http://linustechtips.com/main/topic/131898-wip-project-impracticality-new-name-partsdesign-update/ Wallpaper dump: http://linustechtips.com/main/topic/227721-cool-backgrounds-i-found-on-imgur-now-with-phone-backgrounds/ Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author When you get off work, you can come and join in the fun. Also, there are 4 PLX chips that I'm in charge of and I can't be at all of them at once (that is why I have alarms set up for each one) If you ever need some place to host some kind of party, I'll let you use one! Thanks for the raise! I hear alarms for the hard drives going off. Are they overheating? "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 I hear alarms for the hard drives going off. Are they overheating? Who's in charge of cooling? The year is 20XX. Everyone plays Fox at TAS levels of perfection. Because of this, the winner of a match depends solely on port priority. The RPS metagame has evolved to ridiculous levels due to it being the only remaining factor to decide matches. Only Abate, Axe, and Wobbles can save us. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 I hear alarms for the hard drives going off. Are they overheating? Who's in charge of HDDs? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author Who's in charge of HDDs? Who's in charge of cooling? No clue. That position is open. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 I hear alarms for the hard drives going off. Are they overheating? Idk as I did not set them up. The HDDs should not overheat. I have examined each of the racks and they all have adequate cooling (although that adequate cooling makes it sound like a vacuum cleaner) so everything should be fine. The K2 graphics cards are passively cooled, so they would overheat long before the hard drives NEW BUILD LOG!!!: Project Comilinx http://linustechtips.com/main/topic/313532-in-progress-project-comilinx-side-panel-modpainting-update-1932015/ Other build: Project Impracticality http://linustechtips.com/main/topic/131898-wip-project-impracticality-new-name-partsdesign-update/ Wallpaper dump: http://linustechtips.com/main/topic/227721-cool-backgrounds-i-found-on-imgur-now-with-phone-backgrounds/ Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author Idk as I did not set them up. The HDDs should not overheat. I have examined each of the racks and they all have adequate cooling (although that adequate cooling makes it sound like a vacuum cleaner) so everything should be fine. The K2 graphics cards are passively cooled, so they would overheat long before the hard drives Well, maybe WC them and see if it makes any difference. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Well, maybe WC them and see if it makes any difference. This is a big server so that will take a lot of time and $$$ The year is 20XX. Everyone plays Fox at TAS levels of perfection. Because of this, the winner of a match depends solely on port priority. The RPS metagame has evolved to ridiculous levels due to it being the only remaining factor to decide matches. Only Abate, Axe, and Wobbles can save us. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author This is a big server so that will take a lot of time and $$$ Yeah, and we are so miniscule even carrying coolant is a pain. YKW, scratch that. Just put a lot of fans where it allows and doesn't disrupt the look of it. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Yeah, and we are so miniscule even carrying coolant is a pain. YKW, scratch that. Just put a lot of fans where it allows and doesn't disrupt the look of it. Even if we were able to, watercooling the server would be impossible as we are dealing with 2U and 4U units that are filled to the brim with hardware. We could order in some noctua 40, 80, and 120mm fans and convince an operator to install them. NEW BUILD LOG!!!: Project Comilinx http://linustechtips.com/main/topic/313532-in-progress-project-comilinx-side-panel-modpainting-update-1932015/ Other build: Project Impracticality http://linustechtips.com/main/topic/131898-wip-project-impracticality-new-name-partsdesign-update/ Wallpaper dump: http://linustechtips.com/main/topic/227721-cool-backgrounds-i-found-on-imgur-now-with-phone-backgrounds/ Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author Even if we were able to, watercooling the server would be impossible as we are dealing with 2U and 4U units that are filled to the brim with hardware. We could order in some noctua 40, 80, and 120mm fans and convince an operator to install them. Yeah, I think more fans would be the best choice here, even if it means a bit more noise. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Yeah, I think more fans would be the best choice here, even if it means a bit more noise. Those fans are extremely quiet so there would not be any added noise! NEW BUILD LOG!!!: Project Comilinx http://linustechtips.com/main/topic/313532-in-progress-project-comilinx-side-panel-modpainting-update-1932015/ Other build: Project Impracticality http://linustechtips.com/main/topic/131898-wip-project-impracticality-new-name-partsdesign-update/ Wallpaper dump: http://linustechtips.com/main/topic/227721-cool-backgrounds-i-found-on-imgur-now-with-phone-backgrounds/ Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Yeah, I think more fans would be the best choice here, even if it means a bit more noise. More fans=lower speeds for same cooling= lower noise To a point The year is 20XX. Everyone plays Fox at TAS levels of perfection. Because of this, the winner of a match depends solely on port priority. The RPS metagame has evolved to ridiculous levels due to it being the only remaining factor to decide matches. Only Abate, Axe, and Wobbles can save us. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author Those fans are extremely quiet so there would not be any added noise! Still, considering our size, even that would be a lot of noise. @Yummychickenblue, I put you in charge with the hard drives, so I need you to install the fans. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Still, considering our size, even that would be a lot of noise. @Yummychickenblue, I put you in charge with the hard drives, so I need you to install the fans. K I will get on it. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author C'mon, the memory issue hasn't been fixed yet. If nobody fixes it, the entire server will go corrupt. Go fix it or I lower whoever's salary that is . "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 C'mon, the memory issue hasn't been fixed yet. If nobody fixes it, the entire server will go corrupt. Go fix it or I lower whoever's salary that is . You reassigned me from memory to HDD so I am working on that, it looks like their are some driver issues I will need to look at. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author You reassigned me from memory to HDD so I am working on that, it looks like their are some driver issues I will need to look at. Oh, so I wonder who I should give it to. Maybe @WinNut, but he's offline. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Oh, so I wonder who I should give it to. Maybe @WinNut, but he's offline. Okay I fixed the memory issue. I did a hot swap of the sticks and it's fine. Also, why the living FUCK would I be on LTT at 11PM? I need to catch sleep since I am a middle-schooler. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author Okay I fixed the memory issue. I did a hot swap of the sticks and it's fine. Also, why the living FUCK would I be on LTT at 11PM? I need to catch sleep since I am a middle-schooler. Sweet. Now all the memory needs optimization to keep it running at peak performance. What is the latency of this ram? "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Sweet. Now all the memory needs optimization to keep it running at peak performance. What is the latency of this ram? CL3 ECC, sir, clocked at 3000MHz. It's a 16GB stick of DDR3-3000 ECC memory from Linus Memory Technologies Inc. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 Author CL3 ECC, sir, clocked at 3000MHz. It's a 16GB stick of DDR3-3000 ECC memory from Linus Memory Technologies Inc. OH DAMN! Cost: better not be over 5000LSC/stick. "If it has tits or tires, at some point you will have problems with it." -@vinyldash303 this is probably the only place i'll hang out anymore: http://linustechtips.com/main/topic/274320-the-long-awaited-car-thread/ Current Rig: Intel Core 2 Quad Q6600, Abit IN9-32MAX nForce 680i board, Galaxy GT610 1GB DDR3 gpu, Cooler Master Mystique 632S Full ATX case, 1 2TB Seagate Barracuda SATA and 1x200gb Maxtor SATA drives, 1 LG SATA DVD drive, Windows 10. All currently runs like shit Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 OH DAMN! Cost: better not be over 5000LSC/stick. I received a forum member discount, it was 40LSC per stick and I ordered 4 sticks. They should be here on Tuesday. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted April 6, 2014 We need to get this thread moved to GD. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now