Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Pc wont post with the 24 pin mobo cable

So i was rerouting cables in my work PC yesterday and when i plugged everything back in the pc would no longer post. No beep, nothing. 

 

Jumping the 24 pin and using another PSU works, as you can see a bit of the monitor in the picture. 

 

I have tested the CX500 cables with a multimeter and everything looks like it should be working fine. Values seems good. The -12v rail was at -11.8v but I dont know if this is a problem. 

 

I can't see any physical damage to the PSU unit or cables/pins. The 24pin socket/plug on the motherboard seems fine also as it boots with another PSU. Is there anything i can do to get the CX500 working again? 

 

I have just tested with a GPU plugged into the board and powered off the CX500. Pc posted and displayed bios as expected. 

1620813577093.jpg

Link to post
Share on other sites

Get a multimeter and check all the voltages in the connector. 

Could be some voltage (ex 5v or 3.3v) is outside acceptable range and therefore power supply never reports power_ok / power_good   to the motherboard through the pin (see picture below) 

If you're forcing the power supply to start by shorting PS_ON to ground, you're basically telling the power supply to ignore all its warnings to you and just output everything as they are, so your hard drives could receive some other voltage instead of 5v through the sata connectors and you could damage them

 

The EPS (cpu) connector and the pci-e 6/8 pin connectors have only 12v and GND wires and 12v output is probably good enough that your motherboard / cpu would work. 

 

 

image.png.a1b8b8c0c20f3f792a5cd3b8711efd9d.png

Link to post
Share on other sites

@mariushm thanks for the reply. I mentioned in my post that I have tested with a multimeter to make sure voltages were correct and everything looked fine. I also hadn't plugged any drives in as i only needed to get into BIOS. 

Link to post
Share on other sites

so the bomb psu works but the cx500 does not?

 

well it seems like your cx500 just does not work.

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to post
Share on other sites
8 minutes ago, SavageNeo said:

so the bomb psu works but the cx500 does not?

 

well it seems like your cx500 just does not work.

Yeah, kinda. Everything with the cx500 works except the 24pin atx cable. 

Link to post
Share on other sites
Just now, Sam Harradine said:

Yeah, kinda. Everything with the cx500 works except the 24pin atx cable. 

well that is your problem then. something is wrong with the cable. sadly the cx500 is semimodular so you cannot replace the cable. atleast easily. also the cx500 (green label, is what you have) is pretty meh psu. 

QUOTE ME  FOR ANSWER.

 

Main PC:

Spoiler

|Ryzen 7 3700x, OC to 4.2ghz @1.3V, 67C, or 4.4ghz @1.456V, 87C || Asus strix 5700 XT, +50 core, +50 memory, +50 power (not a great overclocker) || Asus Strix b550-A || G.skill trident Z Neo rgb 32gb 3600mhz cl16-19-19-19-39, oc to 3733mhz with the same timings || Cooler Master ml360 RGB AIO || Phanteks P500A Digital || Thermaltake ToughPower grand RGB750w 80+gold || Samsung 850 250gb and Adata SX 6000 Lite 500gb || Toshiba 5400rpm 1tb || Asus Rog Theta 7.1 || Asus Rog claymore || Asus Gladius 2 origin gaming mouse || Monitor 1 Asus 1080p 144hz || Monitor 2 AOC 1080p 75hz || 

Test Rig.

Spoiler

Ryzen 5 3400G || Gigabyte b450 S2H || Hyper X fury 2x4gb 2666mhz cl 16 ||Stock cooler || Antec NX100 || Silverstone essential 400w || Transgend SSD 220s 480gb ||

Just Sold

Spoiler

| i3 9100F || Msi Gaming X gtx 1050 TI || MSI Z390 A-Pro || Kingston 1x16gb 2400mhz cl17 || Stock cooler || Kolink Horizon RGB || Corsair CV 550w || Pny CS900 120gb ||

 

Tier lists for building a PC.

 

Motherboard tier list. Tier A for overclocking 5950x. Tier B for overclocking 5900x, Tier C for overclocking 5800X. Tier D for overclocking 5600X. Tier F for 4/6 core Cpus at stock. Tier E avoid.

(Also case airflow matter or if you are using Downcraft air cooler)

Spoiler

 

Gpu tier list. Rtx 3000 and RX 6000 not included since not so many reviews. Tier S for Water cooling. Tier A and B for overcloking. Tier C stock and Tier D avoid.

( You can overclock Tier C just fine, but it can get very loud, that is why it is not recommended for overclocking, same with tier D)

Spoiler

 

Psu tier List. Tier A for Rtx 3000, Vega and RX 6000. Tier B For anything else. Tier C cheap/IGPU. Tier D and E avoid.

(RTX 3000/ RX 6000 Might run just fine with higher wattage tier B unit, Rtx 3070 runs fine with tier B units)

Spoiler

 

Cpu cooler tier list. Tier 1&2 for power hungry Cpus with Overclock. Tier 3&4 for overclocking Ryzen 3,5,7 or lower power Intel Cpus. Tier 5 for overclocking low end Cpus or 4/6 core Ryzen. Tier 6&7 for stock. Tier 8&9 Ryzen stock cooler performance. Do not waste your money!

Spoiler

 

Storage tier List. Tier A for Moving files/  OS. Tier B for OS/Games. Tier C for games. Tier D budget Pcs. Tier E if on sale not the worst but not good.

(With a grain of salt, I use tier C for OS myself)

Spoiler

 

Case Tier List. Work In Progress. Most Phanteks airflow series cases already done!

Ask me anything :)

Link to post
Share on other sites
1 hour ago, SavageNeo said:

well that is your problem then. something is wrong with the cable. sadly the cx500 is semimodular so you cannot replace the cable. atleast easily. also the cx500 (green label, is what you have) is pretty meh psu. 

Yeah i figured that. Wasn't sure if there was anything i can do or if anyone knew what was actually going on as the voltages for the pins are reading expected ranges. 

 

Unfortunately it's a work PC and was here before i started so i couldn't choose the components. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×