Jump to content

Corsair h100I v2 AIO help

Phantom_PXL
By Phantom_PXL
in Cases and Mods
 Share
Posted

Hey yes i boght this pc rig rom somone and it has a corsair h100iv2 aio on it and i found the power wires were cut and i was wondering if anyone knew which wires were power ground ect. well besides the obvious labled ones. and if anyone knows what the voltaged need to power the pump.

20200622_120525.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Talking out loud here - isn't the CPU pump wire 3 pin and the fans 4 pin?  I was just installing one of these the other day.  Are those the 4 PWM fan lines?

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Here is my general understanding of what goes where with this, though there are probably better documented instances of this online. PWM is the pwm pin on a fan connector, PWR is 12v, gnd is ground, and then TACH is the RPM signal from the fan (tells mb how fast the fan is going). Based on this, you can kind of figure out what goes where. Also, why aren't you just using the regular connectors?

i like trains 🙂

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Tristerin said:

Are those the 4 PWM fan lines?

i was looking at this thread and now that i saw your post 

it could be , other than that i have no idea 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Tristerin said:

Talking out loud here - isn't the CPU pump wire 3 pin and the fans 4 pin?  I was just installing one of these the other day.  Are those the 4 PWM fan lines?

idk but when i use the "3 pin" which is 2 diffrent connectors the cpu is sitting at 70 c at idle. and when the 3 pin is plugged in the leds turn on but the pump dont seems like it turns on.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, pierom_qwerty said:

Here is my general understanding of what goes where with this, though there are probably better documented instances of this online. PWM is the pwm pin on a fan connector, PWR is 12v, gnd is ground, and then TACH is the RPM signal from the fan (tells mb how fast the fan is going). Based on this, you can kind of figure out what goes where. Also, why aren't you just using the regular connectors?

because someone cut them. thats why im not using them. i would if they still were there

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Phantom_PXL said:

idk but when i use the "3 pin" which is 2 diffrent connectors the cpu is sitting at 70 c at idle. and when the 3 pin is plugged in the leds turn on but the pump dont seems like it turns on.

So its 3 pin 3 pin daisychain as male?  That would mean you connect female fan headers (the wires that come off the fans themselves)there.  If so I was wrong in my original statement (I have the GTX version not sure how it correlates to the V2)

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Tristerin said:

So its 3 pin 3 pin daisychain as male?  That would mean you connect female fan headers there.  If so I was wrong in my original statement (I have the GTX version not sure how it correlates to the V2)

well no its a 3 pin split into a 2 pin and 1 pin. the one pin is for the fan headder on the mb while the other is a sata power connector.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, Phantom_PXL said:

because someone cut them. thats why im not using them. i would if they still were there

 

Ah i see. So I am busy right now, but in a few hours id be happy to draw you out a diagram of what should go where, but I am preparing for an ACT currently, and you know how important those are lol.

i like trains 🙂

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×