Jump to content

I read in intel warranty, that if cpu operates on higher voltage, or clock than base, it voids cpu warranty. Nevertheless, there is no default voltage listed on intel 9600kf page... And i don't know what are stock voltages, is 1.291v max on one core ok, during 100% load ? I read read turning on xmp profile may void your warranty, as it can cause cpu operating on higher voltages. Because VCCIO and VCCSA, i don't know what that is. But it happened to someone, intel didn't endorse warranty, because of that. So i wonder what may void your warranty, hope not disabling c states and p states, thermal monitor and power saving features too.

 

Link to comment
https://linustechtips.com/topic/1201788-what-does-void-intel-cpu-warranty/
Share on other sites

Link to post
Share on other sites

Intel lists it's warranty terms for CPU's on it's website and you can check there what voids and what doesn't void your warranty.

https://www.intel.com/content/dam/support/us/en/documents/processors/Limited_Warranty_8.5x11_for_Web_English.pdf

Link to post
Share on other sites

Quote

any Product which has been modified or operated outside of Intel’s publicly available specifications, including where clock frequencies or voltages have been altered, or where the original identification markings have been removed, altered or obliterated. Intel assumes no responsibility that the Product, including if used with altered clock frequencies or voltages, will be fit for any particular purpose and will not cause any damage or injury.

yeah, it breaks the warranty, but you can't identify if the chip has been overclocked, unless it's burned.

Ryzen 5700g @ 4.4ghz all cores | Asrock B550M Steel Legend | 3060 | 2x 16gb Micron E 2666 @ 4200mhz cl16 | 500gb WD SN750 | 12 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to post
Share on other sites

If your CPU dies they wont be able to tell u used higher voltage if you dont tell them yourself.

On Intel I'd say anything below 1.4 volts is ok, 1.35 is ok for 24/7 use.

But of course look out for temps and adjust them to be as low as the can be while being stable.

If someone did not use reason to reach their conclusion in the first place, you cannot use reason to convince them otherwise.

Link to post
Share on other sites

3 minutes ago, SupaKomputa said:

yeah, it breaks the warranty, but you can't identify if the chip has been overclocked, unless it's burned.

You sure about that ? Intel can have something to log voltage etc. on which cpu was running right ? It is 2020. I also asked at the shop i bought it, because they may not have same policy.

 

 

Link to post
Share on other sites

a logger in the chip? naah. never heard of it. just as i rarely heard about dead cpus.

Ryzen 5700g @ 4.4ghz all cores | Asrock B550M Steel Legend | 3060 | 2x 16gb Micron E 2666 @ 4200mhz cl16 | 500gb WD SN750 | 12 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to post
Share on other sites

Who knows, who knows. But yeah dead cpus are not that common. Still i would rather not void my warranty by some accident. If intel doesn't provide stock voltage, so how one can be sure, to not break warranty. But if you say they can't tell, than it should be fine. Just hope you right. Othewise i have temp monitor and good cooler, so i should be fine.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×