Jump to content

Deepcool Neptwin V2 with 3700x

DatLe
By DatLe
in Cooling
 Share
Posted

I was planning to buy this one because its price is quite cheap in Vietnam and the size is also reasonable, but some people say it is not as good as the CM MA620P although it is bigger and there are quite a few cases that can fit.  If there is a suitable case, its price is also quite high.  So should I buy it?

Link to comment
https://linustechtips.com/topic/1164523-deepcool-neptwin-v2-with-3700x/
Share on other sites
Link to post
Share on other sites
Posted

Even MA620P looks more impressive than its actual performance (just less so than the Neptwin), if you arent cooling something massively hot I dont see why you shouldnt buy the Neptwin

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
On 3/6/2020 at 7:56 PM, DatLe said:

I was planning to buy this one because its price is quite cheap in Vietnam and the size is also reasonable, but some people say it is not as good as the CM MA620P although it is bigger and there are quite a few cases that can fit.  If there is a suitable case, its price is also quite high.  So should I buy it?

I had the neptwin v2 in my last build. Good mounting system, fairly quiet, stays cool.

I recommend it.

Link to post
Share on other sites
Posted
58 minutes ago, DatLe said:

I plan to buy Deepcool Neptwin v2 for use with R7 3700x because of its good price but it also fits the case.  Does it really fit?

Depends on the size of your case. Measure your case depth and compare that to the measurements of the Neptwin.

The deep blue sky is infinitely high and crystal clear.

私はオタクではありません。

Link to post
Share on other sites
Posted

The MA620P is a bit better but the Neptwin V2 is also fine if you'd prefer to save some money. 

What case and ram are you using?

Why are you looking at these coolers in particular? Can you link us to where you're shopping? Budget?

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×