Jump to content

How to remove next H710 cable bar ?

Lomoon
By Lomoon
in Cases and Mods
 Share
Posted

All of the screws that secure the cable bar in place are so extremely tight that the heads of the screws will round if I continue to try and turn them, can anyone help me with a solution to getting these out. 
 

Thank you

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

NZXT is known for factory tightening their screws very tight. You'll need to push very hard with a screw driver into the screw in order to make sure you have the torque needed to loosen them., if you dont, you'll strip the screw. You can also try putting a rubber band in between the bit and the head of the screw to help get some friction if it's already half stripped

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU AMD R7 7800X3D    Motherboard Asrock B650E Taichi Lite    RAM Corsair Vengeance RGB 32GB 5200mhz    GPU ASUS RTX4080 STRIX 

Case Fractal Torrent   Storage Samsung 980Pro 2TB, Crucial P3 Plus 4TB x2,     PSU Corsair RM1000x    Cooling Deepcool AK620

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, TVwazhere said:

NZXT is known for factory tightening their screws very tight. You'll need to push very hard with a screw driver into the screw in order to make sure oyu have the torque needed to loosen them., if you dont, you'll strip the screw. You can also tryp utting a rubber band in between the bit and the head of the screw to help get some friction if it's already half stripped

Thank you that has helped a lot. Do you also know how I get to the top screw?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, Lomoon said:

Thank you that has helped a lot. Do you also know how I get to the top screw?

Dont know. It's not accessible from the front? If not, then it's either accessible from the back ot the case, the top, or it's just a clip. (I have never worked with the case so I dont have first hand knowledge)

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU AMD R7 7800X3D    Motherboard Asrock B650E Taichi Lite    RAM Corsair Vengeance RGB 32GB 5200mhz    GPU ASUS RTX4080 STRIX 

Case Fractal Torrent   Storage Samsung 980Pro 2TB, Crucial P3 Plus 4TB x2,     PSU Corsair RM1000x    Cooling Deepcool AK620

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×