case for a beefy build

[dogwitch]

what would be a better case with solid air floor and space?

i could care less about rgb

https://pcpartpicker.com/user/firedrakes/saved/NgFJ8d

[Whiro]

31 minutes ago, dogwitch said:

what would be a better case with solid air floor and space?

i could care less about rgb

https://pcpartpicker.com/user/firedrakes/saved/NgFJ8d

I would go with that case 

http://www.phanteks.com/Eclipse-P600s.html

[RejZoR]

Silverstone Kublai KL-07

https://www.silverstonetek.com/product.php?pid=680&area=en

 

If you don't care about RGB and you value silence while using high end system, this is the ultimate case. I was looking for such design for years and finally found it. Only thing I can say bad about it is slightly difficult integration of PSU into the dedicated space. Seems a bit cramped. But everything else is absolutely amazing. Noise insulated front intake, noise insulated top exhaust, foam on all panels, tons of spots to use up to 6x 140mm fans, dust filter in the front and bottom for PSU, HP+mic, 2x USB + 1x USB C on IO panel.

 

It's as plain as one can possibly make the case plain, but functionality wise, absolutely amazing. Very quiet, still delivers spectacular cooling capacity, easy for maintenance. Space for PSU and cable management might be on a tight side, but how often do you fiddle with that? When it's organized properly, it stays that way. And can be done and without much hassle.

 

Btw, why do you need so many separate tiny SSD's? Kublai has 3x dedicated 2.5" SSD slots and 3x HDD slots, but still, that's a lot. Also 2x RX 580 ? For same money you could just get a 4TB Samsung SSD and Radeon VII if you want Radeon. Or RX 5700 XT which just annihilates even 2x RX 580. With zero scaling issues.

[dogwitch]

am not running them in cross fire. i run a quad monitor set up.

i don't game hard.

i got 4 580s for 240 bucks last year. moron had no clue what he had.... i sold one and keeps 3 and made the cost of the 3 cards back.

i got ever ssd(not the m.) so dirty cheap .

i use the 500gb ssd for 4k file server

the other ssds will be combine into 1 and  last one is a intake. for my camera.

then i have both a 8tb hdd and the 4tb hdd.

i do photography now and slowly getting into video again(old hard ware for a long time stop me doing it)

 

 

 

[TVwazhere]

P600s would be a solid choice. 

[Whiro]

1 minute ago, TVwazhere said:

P600s would be a solid choice. 

I’ve seen some P500A in CES, looks interesting but not sure when they’ll release it.

[TVwazhere]

16 minutes ago, Whiro said:

I’ve seen some P500A in CES, looks interesting but not sure when they’ll release it.

Damn, for $99 that's a stellar case. Probably will be 6 months until it releases, I didnt hear the word "prototype used. Will also have to keep an eye on the P300A as well

[dogwitch]

13 minutes ago, TVwazhere said:

Damn, for $99 that's a stellar case. Probably will be 6 months until it releases, I didnt hear the word "prototype used. Will also have to keep an eye on the P300A as well

that would be a good price to. does anyone have the link to said version to look at it?

[TVwazhere]

Just now, dogwitch said:

that would be a good price to. does anyone have the link to said version to look at it?

 

[BarackOBatman]

Its from 2017 and its a little on the noisier side, but this case has some of the best stock thermals you can get.

Edit: The H500 mesh in your PCpartpicket list is also great! Not quite as good thermally as the RL06, but great nonetheless!

 

https://www.newegg.com/p/N82E16811163379?item=9SIAD6F6MV1049&source=region&nm_mc=knc-googlemkp-pc&cm_mmc=knc-googlemkp-pc-_-pla-ventura+buy-_-cases+(computer+cases+-+atx+form)-_-9SIAD6F6MV1049&gclid=CjwKCAiAmNbwBRBOEiwAqcwwpQ26zcPMU2xpOULotVFmu4Mz2g-SpKS1Wcpq1ZE1c1FLoAoXB5ytbxoC1nEQAvD_BwE&gclsrc=aw.ds

 

[dogwitch]

just a heads up all am running a etax mobo. so..... the cases mention should work.?

[Whiro]

13 minutes ago, dogwitch said:

just a heads up all am running a etax mobo. so..... the cases mention should work.?

Silverstone Kublai KL-07 does not support eatx mobo,

Phanteks P600S supports them but check the pic, all depends what mobo you have

[dogwitch]

that one does fit.

[mtosic]

P500A is P600S with mesh front panel (based on HardwareCanucks video) so it might be out soon.

Looks like ideal case for big air coolers and long video cards.

 

If it will be similar to P400A options you can buy it with and without RGB fans (I prefer without).

[TVwazhere]

15 hours ago, dogwitch said:

just a heads up all am running a etax mobo. so..... the cases mention should work.?

This one in your parts list?

https://pcpartpicker.com/product/kjmxFT/asrock-x399-taichi-atx-tr4-motherboard-x399-taichi

 

It's an ATX board

[dogwitch]

8 hours ago, TVwazhere said:

This one in your parts list?

https://pcpartpicker.com/product/kjmxFT/asrock-x399-taichi-atx-tr4-motherboard-x399-taichi

 

It's an ATX board

true but it is widder then a normal atx mobo. seeing my old gaming mobo from a long time ago was less wider and a few year  like 3 year old mobo i have is also less wide.

seeing their the space for the cable on the sata drive to bend and that it. their no more space at all  inside the case on mobo.

also a bit longer thru. it fit in my current case. but it was a tight fit

[TVwazhere]

1 minute ago, dogwitch said:

true but it is widder then a normal atx mobo.

 

Normal ATX motherboards are 12" x 9.6". There are "ATX" cases that aern't a the full 9.6" wide though (they use six or seven standoffs instead of nine such as this ASrock B450 Pro)

[dogwitch]

ahh. but still h500 version i got was a tight fit with mobo. and cabling management in the back their is almost none. wires overall for everything are not the length need to do proper .