Jump to content

Help With Wifi and Wifi Settings

Carlos Rendon
By Carlos Rendon
in Networking
 Share
Go to solution Solved by Shahnewaz,

Ah I see. Keep everything as I said, only change the Wireless Mode back to mixed.

39 minutes ago, Shahnewaz said:

Wireless Mode: *mixed*

Channel Width: Start with 40MHz and work your way up.

Band Steering: Enabled

DCS: Enabled

Auth Mode: WPA2 only

Encrypt Mode: AES only

ATF Enable: Enabled

 

Posted
  • Author

Ok  so 5g is working with these settings :    I had to turn OFF band steering.  If it was on , it won't let me change the auth mode or encrypt mode.   atf  is on1894726893_2019-12-2615_49_43-CODA-4582-ONERouter-HitronTechnologies.thumb.jpg.f33cc9a842916c5c687b0d6923cca271.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If Band Steering is enabled you only need to change Auth and Encrypt on one tab (2.4GHz or 5GHz). Both will use the same settings. You cannot have Band Steering enabled and have different security settings for the two bands.

Leave it at enabled, change it on whichever panel (2.4GHz/5GHz) the security settings show up.

 

ATF will make sure your iPhone's WiFi performance isn't nuked.

Quote

The problem is that this is an nVidia product and scoring any nVidia product a "zero" is also highly predictive of the number of nVidia products the reviewer will receive for review in the future.

On 2015-01-28 at 5:24 PM, Victorious Secret said:

Only yours, you don't shitpost on the same level that we can, mainly because this thread is finally dead and should be locked.

On 2016-06-07 at 11:25 PM, patrickjp93 said:

I wasn't wrong. It's extremely rare that I am. I provided sources as well. Different devs can disagree. Further, we now have confirmed discrepancy from Twitter about he use of the pre-release 1080 driver in AMD's demo despite the release 1080 driver having been out a week prior.

On 2016-09-10 at 4:32 PM, Hikaru12 said:

You apparently haven't seen his responses to questions on YouTube. He is very condescending and aggressive in his comments with which there is little justification. He acts totally different in his videos. I don't necessarily care for this content style and there is nothing really unique about him or his channel. His endless dick jokes and toilet humor are annoying as well.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
53 minutes ago, Shahnewaz said:

If Band Steering is enabled you only need to change Auth and Encrypt on one tab (2.4GHz or 5GHz). Both will use the same settings. You cannot have Band Steering enabled and have different security settings for the two bands.

Leave it at enabled, change it on whichever panel (2.4GHz/5GHz) the security settings show up.

 

ATF will make sure your iPhone's WiFi performance isn't nuked.

Ok, question : before turning on band steering, the SSIDs that were available were "Confused"and "Confused-5G"  .....  after turning on band steering, Only the "Confused" wifi appears as my options to connect.  So does that mean I still have 5G speeds?  Should I go up to 80MHz bandwidth (What does this setting do?)?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
4 minutes ago, Carlos Rendon said:

Ok, question : before turning on band steering, the SSIDs that were available were "Confused"and "Confused-5G"  .....  after turning on band steering, Only the "Confused" wifi appears as my options to connect.  So does that mean I still have 5G speeds?  Should I go up to 80MHz bandwidth (What does this setting do?)?

Well, it's a feature. It takes away the 2.4GHz and 5GHz confusion out from the user, and the router deals with band assignment itself.

Only "Confused" will appear in your networks, and the router will automatically assign the best band on your device depending on device specs, noise, signal strength, distance etc.

 

If you don't like it or it causes problems, you can turn it off.

Edited by Shahnewaz
Quote

The problem is that this is an nVidia product and scoring any nVidia product a "zero" is also highly predictive of the number of nVidia products the reviewer will receive for review in the future.

On 2015-01-28 at 5:24 PM, Victorious Secret said:

Only yours, you don't shitpost on the same level that we can, mainly because this thread is finally dead and should be locked.

On 2016-06-07 at 11:25 PM, patrickjp93 said:

I wasn't wrong. It's extremely rare that I am. I provided sources as well. Different devs can disagree. Further, we now have confirmed discrepancy from Twitter about he use of the pre-release 1080 driver in AMD's demo despite the release 1080 driver having been out a week prior.

On 2016-09-10 at 4:32 PM, Hikaru12 said:

You apparently haven't seen his responses to questions on YouTube. He is very condescending and aggressive in his comments with which there is little justification. He acts totally different in his videos. I don't necessarily care for this content style and there is nothing really unique about him or his channel. His endless dick jokes and toilet humor are annoying as well.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
57 minutes ago, Shahnewaz said:

Well, it's a feature. It takes away the 2.4GHz and 5GHz confusion out from the user, and the router deals with band assignment itself.

Only "Confused" will appear in your networks, and the router will automatically assign the best band on your device depending on device specs, noise, signal strength, distance etc.

 

If you don't like it or it causes problems, you can turn it off.

Well awesome! Thanks so much for your help! for the past hour or so I have been problem free.  Is the Channel important or just leave it to auto?  

 

Also, where can I learn all this?  Like I want to know what all the encrypt modes abbreviations mean.  

 

Thanks!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Carlos Rendon said:

Well awesome! Thanks so much for your help! for the past hour or so I have been problem free.  Is the Channel important or just leave it to auto?

Leave it at Auto. The router will automatically change channels when there's too much congestion in one.

1 minute ago, Carlos Rendon said:

Also, where can I learn all this?  Like I want to know what all the encrypt modes abbreviations mean.  

As always, Google is your friend.

 

Cheers! ?

Quote

The problem is that this is an nVidia product and scoring any nVidia product a "zero" is also highly predictive of the number of nVidia products the reviewer will receive for review in the future.

On 2015-01-28 at 5:24 PM, Victorious Secret said:

Only yours, you don't shitpost on the same level that we can, mainly because this thread is finally dead and should be locked.

On 2016-06-07 at 11:25 PM, patrickjp93 said:

I wasn't wrong. It's extremely rare that I am. I provided sources as well. Different devs can disagree. Further, we now have confirmed discrepancy from Twitter about he use of the pre-release 1080 driver in AMD's demo despite the release 1080 driver having been out a week prior.

On 2016-09-10 at 4:32 PM, Hikaru12 said:

You apparently haven't seen his responses to questions on YouTube. He is very condescending and aggressive in his comments with which there is little justification. He acts totally different in his videos. I don't necessarily care for this content style and there is nothing really unique about him or his channel. His endless dick jokes and toilet humor are annoying as well.

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Shahnewaz said:

Leave it at Auto. The router will automatically change channels when there's too much congestion in one.

As always, Google is your friend.

 

Cheers! ?

Thanks ! Cheers! :)

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×