Need your opinion on an Air Cooler! (Hyper 410R)

[Mr. Question Asker]

So I am going to buy Cooler Master Hyper 410R cooler, so how is it?

Your opinion matters a lot to me and how is the installation process, is it easy or hard?

----

(Please write down your thoughts) 

[GoldenLag]

looks similar-ish in performance to a arctic freezer 34. perhaps a bit lower. 

 

seems fine in terms og mounting. 

 

id recommend looking at the arctic freezer 34 esports one/duo over it tho. 

[Turtle Rig]

13 minutes ago, Mr. Question Asker said:

So I am going to buy Cooler Master Hyper 410R cooler, so how is it?

Your opinion matters a lot to me and how is the installation process, is it easy or hard?

----

(Please write down your thoughts) 

If you have money to spend pay 85 bucks and get the DRP4. but if your not going to do hardcore overclocking then the hyper 410r will suffice.

[DoctorNick]

https://www.teckknow.com/cooler-master-hyper-h410r-cooler-review/3/ - Looks alright for the price 25 usd - I you are going for something better I would also recommend something better like the 212X/212 black edition -> Dark Rock 4 -> Dark Rock Pro 4

 

[DoctorNick]

20 minutes ago, GoldenLag said:

looks similar-ish in performance to a arctic freezer 34. perhaps a bit lower. 

 

seems fine in terms og mounting. 

 

id recommend looking at the arctic freezer 34 esports one/duo over it tho. 

I agree with this. Should perform better for the price.

[Mr. Question Asker]

56 minutes ago, GoldenLag said:

looks similar-ish in performance to a arctic freezer 34. perhaps a bit lower. 

 

seems fine in terms og mounting. 

 

id recommend looking at the arctic freezer 34 esports one/duo over it tho. 

Do I need to remove the Mobo to install the cooler, and is it fine to remove Motherboard to install a cooler?

[Mr. Question Asker]

52 minutes ago, Turtle Rig said:

If you have money to spend pay 85 bucks and get the DRP4. but if your not going to do hardcore overclocking then the hyper 410r will suffice.

My CPU is Intel i5 8400, would consider Hyper 212 or Black edition of it, as others and you gave me nice suggestions!

[Turtle Rig]

8 minutes ago, Mr. Question Asker said:

My CPU is Intel i5 8400, would consider Hyper 212 or Black edition of it, as others and you gave me nice suggestions!

You would be good with the hyper 212 black edition.  Since it is not a K chip it will be cooled very well. 

[GoldenLag]

33 minutes ago, Mr. Question Asker said:

Do I need to remove the Mobo to install the cooler, and is it fine to remove Motherboard to install a cooler?

Its likely you can manage to install it without removing the board. Can be a bit tricky tho.

 

32 minutes ago, Mr. Question Asker said:

My CPU is Intel i5 8400, would consider Hyper 212 or Black edition of it, as others and you gave me nice suggestions!

Hyper 212 is a nightmare to install. Hyper 212 black edition is not. 

 

Would take the arctic freezer 34 esports one over both.

[Mr. Question Asker]

12 minutes ago, GoldenLag said:

Its likely you can manage to install it without removing the board. Can be a bit tricky tho.

 

Hyper 212 is a nightmare to install. Hyper 212 black edition is not. 

 

Would take the arctic freezer 34 esports one over both.

I agree it would be tricky without removing the motherboard, but if I remove and properly install the cooler then will any damage cause to my mobo If I remove it and install?

[Turtle Rig]

7 minutes ago, Mr. Question Asker said:

I agree it would be tricky without removing the motherboard, but if I remove and properly install the cooler then will any damage cause to my mobo If I remove it and install?

Only damage can be if you tighten the screws so tight you chip the motherboard.  That is not going to happen tho just screw it until its tight.

[GoldenLag]

38 minutes ago, Mr. Question Asker said:

I agree it would be tricky without removing the motherboard, but if I remove and properly install the cooler then will any damage cause to my mobo If I remove it and install?

No, you will be fine.

 

31 minutes ago, Turtle Rig said:

Only damage can be if you tighten the screws so tight you chip the motherboard.  That is not going to happen tho just screw it until its tight.

To quote from some random person

Quote

Screw with confidence, not force

-someone, 20xx

 

[WoodenMarker]

7 hours ago, Mr. Question Asker said:

Do I need to remove the Mobo to install the cooler, and is it fine to remove Motherboard to install a cooler?

What case are you using? Most modern cases come with a motherboard tray cutout for access to the back of the board without removing it for cooler installation. 

The H410R would be fine for cooling the 8400 but there are probably quieter alternatives available if that's what you're aiming for.

What case and ram are you using?

Where are you shopping / located? Budget?

[Mr. Question Asker]

8 hours ago, WoodenMarker said:

What case are you using? Most modern cases come with a motherboard tray cutout for access to the back of the board without removing it for cooler installation. 

The H410R would be fine for cooling the 8400 but there are probably quieter alternatives available if that's what you're aiming for.

What case and ram are you using?

Where are you shopping / located? Budget?

I am using Cooler Master Elite 311!

 

I am using Corsair Vengence RAMs (2x 8GB =16GB @2400MHz), I am shopping from Amazon.in and I am from India!

[WoodenMarker]

On 11/4/2019 at 10:36 PM, Mr. Question Asker said:

I am using Cooler Master Elite 311!

I am using Corsair Vengence RAMs (2x 8GB =16GB @2400MHz), I am shopping from Amazon.in and I am from India!

Sorry for the late reply -- been a bit busy.

Yep, that case includes a cutout in the motherboard tray for installing coolers. 

I'm not seeing anything strictly better for the price than the H410R and it's plenty for cooling so it's a good option. 

[Mr. Question Asker]

On 11/7/2019 at 8:28 PM, WoodenMarker said:

Sorry for the late reply -- been a bit busy.

Yep, that case includes a cutout in the motherboard tray for installing coolers. 

I'm not seeing anything strictly better for the price than the H410R and it's plenty for cooling so it's a good option. 

Yes, my package is coming tomorrow and gonna install and clean my PC along with the installation, tired of the shit cooler noise (Intel Cooler) 

[Mr. Question Asker]

On 11/7/2019 at 8:28 PM, WoodenMarker said:

Sorry for the late reply -- been a bit busy.

Yep, that case includes a cutout in the motherboard tray for installing coolers. 

I'm not seeing anything strictly better for the price than the H410R and it's plenty for cooling so it's a good option. 

Update on my Cooler Installation!

 

I have installed Hyper 410R, because of budget problems, it works great.

 

TEMPS -

Stressed the CPU for 5 Mins

Stock Cooler = 75C Celsius

Hyper H410R = 57C Celsius

 

18 Degree temp improvement and noise is gone that was coming from the Stock Cooler!