SSD Sabrent Rocket NVMe PCIe M.2 and ASRock H170 Pro4S

[PHK]

Hello, I've recently bought the Sabrent Rocket SSD, installed it on my H170 PRO4S in the "ULTRA M.2" slot, then rebooted the PC and I got a black screen. As soon as I removed the ssd from the mobo and restarted the PC worked just fine, what's up? Am I missing something?
Thanks

[Radium_Angel]

35 minutes ago, PHK said:

Thanks

In the bios of your system, it was probably trying to boot from the drive, which is blank (I'm assuming)

[PHK]

On 10/17/2019 at 9:56 PM, Radium_Angel said:

In the bios of your system, it was probably trying to boot from the drive, which is blank (I'm assuming)

I can't get to the bios because screen is black and I get no BIOS/no POST

[Radium_Angel]

2 hours ago, PHK said:

I can't get to the bios because screen is black and I get no BIOS/no POST

Whoops, mis-read that as a blank, rather than a black...screen.

Ok, so if you take it out, the system boots fine.

Is the BIOS firmware up to date?

[PHK]

9 hours ago, Radium_Angel said:

Whoops, mis-read that as a blank, rather than a black...screen.

Ok, so if you take it out, the system boots fine.

Is the BIOS firmware up to date?

Yep, updated and tried to install the ssd again, same result