Jump to content

Overtemp cpu

Twistr360
 Share
Posted

I was doing some cable management and just plugged everything back in, now my cpu just hit 77 degrees C, even though it seems my AIO is on and working, fans and all. Any advice?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Tighten the CPU cooler mounting screws, maybe they got loose when you're working on it.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
10 minutes ago, Jurrunio said:

Tighten the CPU cooler mounting screws, maybe they got loose when you're working on it.

I think it’s the thermal compound, it’s in splotches. The stock one that cane with the AIO.

image.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, Twistr360 said:

I think it’s the thermal compound, it’s in splotches. The stock one that cane with the AIO.

Yeah based on that picture I can say that there doesn't seem to be enough thermal paste. Go buy a tube of NT-H1 and repaste her, and it should be good to go.

CPU: INTEL Core i7 4790k @ 4.7Ghz - Cooling: NZXT Kraken X61 - Mobo: Gigabyte Z97X SLI - RAM: 16GB G.Skill Ares 2400mhz - GPU: AMD Sapphire Nitro R9 Fury 4G - Case: Phanteks P350X - PSU: EVGA 750GQ - Storage: WD Black 1TB - Fans: 2x Noctua NF-P14s (Push) / 2x Corsair AF140 (Pull) / 3x Corsair AF120 (Exhaust) - Keyboard: Corsair K70 Cherry MX Red - Mouse: Razer Deathadder Chroma

Bit of an AMD fan I suppose. I don't bias my replies to anything however, I just prefer AMD and their products. Buy whatever the H*CK you want. 

---QUOTE ME OR I WILL LIKELY NOT REPLY---

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Vegetable said:

Yeah based on that picture I can say that there doesn't seem to be enough thermal paste. Go buy a tube of NT-H1 and repaste her, and it should be good to go.

Oh I have some paste already: Thermaltake TG-7. Only used once. I’ll use this.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
14 minutes ago, Vegetable said:

Yeah based on that picture I can say that there doesn't seem to be enough thermal paste. Go buy a tube of NT-H1 and repaste her, and it should be good to go.

Would you recommend 99% Isopropyl alcohol? I’m looking for some but all I see is 91%

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
23 minutes ago, Twistr360 said:

Would you recommend 99% Isopropyl alcohol? I’m looking for some but all I see is 91%

It really doesn't matter as long as you don't drench the board with it. Personally I've used 70% and it doesn't really make a difference vs 99%. Just don't be an idiot basically.

CPU: INTEL Core i7 4790k @ 4.7Ghz - Cooling: NZXT Kraken X61 - Mobo: Gigabyte Z97X SLI - RAM: 16GB G.Skill Ares 2400mhz - GPU: AMD Sapphire Nitro R9 Fury 4G - Case: Phanteks P350X - PSU: EVGA 750GQ - Storage: WD Black 1TB - Fans: 2x Noctua NF-P14s (Push) / 2x Corsair AF140 (Pull) / 3x Corsair AF120 (Exhaust) - Keyboard: Corsair K70 Cherry MX Red - Mouse: Razer Deathadder Chroma

Bit of an AMD fan I suppose. I don't bias my replies to anything however, I just prefer AMD and their products. Buy whatever the H*CK you want. 

---QUOTE ME OR I WILL LIKELY NOT REPLY---

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

FWIW I have an H100i cooler and after 4 years it just wouldn't cool anymore. Seem to be quite a few posts of these failing after time.

 

 

AWOL

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×