Jump to content

Is this CPU Cooler enough?

ExiitHD
By ExiitHD
in Custom Loop and Exotic Cooling
 Share
Go to solution Solved by WoodenMarker,
22 minutes ago, ExiitHD said:

so the model i have doesnt require one?

If it's the one you linked and not the GTX / V2, then you don't need AM4 mounting hardware since it should hook onto the stock AMD retention clips.

Posted

at stock yes.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
1 minute ago, ExiitHD said:

i dont plan on overclocking right now

then it's more than enough for stock.

8086k

aorus pro z390

noctua nh-d15s chromax w black cover

evga 3070 ultra

samsung 128gb, adata swordfish 1tb, wd blue 1tb

seasonic 620w dogballs psu

 

 

Link to post
Share on other sites
Posted
1 minute ago, Jurrunio said:

at stock yes.

Can this not handle a higher overclock to 4.0 or 4.2? 

8086k

aorus pro z390

noctua nh-d15s chromax w black cover

evga 3070 ultra

samsung 128gb, adata swordfish 1tb, wd blue 1tb

seasonic 620w dogballs psu

 

 

Link to post
Share on other sites
Posted

Definitely able to cool this CPU, even with minor overclocking.

But certain H100i model (v2) requires an additional AM4-AMD Retention Bracket Kit to work properly.

"Mankind’s greatest mistake will be its inability to control the technology it has created."

Link to post
Share on other sites
Posted
15 minutes ago, mxk. said:

Can this not handle a higher overclock to 4.0 or 4.2? 

I dont know how high the voltage shoots to or the workload used.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
9 minutes ago, Jurrunio said:

I dont know how high the voltage shoots to or the workload used.

Oops, bad question. Sorry.

8086k

aorus pro z390

noctua nh-d15s chromax w black cover

evga 3070 ultra

samsung 128gb, adata swordfish 1tb, wd blue 1tb

seasonic 620w dogballs psu

 

 

Link to post
Share on other sites
Posted
  • Solution
22 minutes ago, ExiitHD said:

so the model i have doesnt require one?

If it's the one you linked and not the GTX / V2, then you don't need AM4 mounting hardware since it should hook onto the stock AMD retention clips.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×