Jump to content

6600t PC Build

Aaralli
 Share
Posted

I am going to build a pc for my father using an Intel Core i5-6600t. He currently has a pc with an AMD Athlon II x4 651k, gtx 680, 8gb ddr3 ram, and an ssd in a micro atx case. I would like to build this with relatively inexpensive parts, and I can reuse the power supply and RAM if I need to. Tell me what parts I should buy please. I'm asking about a cooler, fans, board, and anything else you can think of.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

For gaming or just office work or for fun or a mix of these?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Jurrunio said:

For gaming or just office work or for fun or a mix of these?

Light gaming, lots of office work. He owns a lot of games made between the 90s and 2015. (A few older AAA titles)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, Aaralli said:

can reuse the power supply and RAM if I need to.

Well, what's the make and model of the PSU? Also it's hard to find a DDR3 motherboard for that 6th gen CPU, you'll likely need some DDR4 and an H110 motherboard.

 

Also, gotta ask, do you already have the 6600t or did you choose it for the upgrade specifically?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
14 hours ago, fasauceome said:

Well, what's the make and model of the PSU? Also it's hard to find a DDR3 motherboard for that 6th gen CPU, you'll likely need some DDR4 and an H110 motherboard.

 

Also, gotta ask, do you already have the 6600t or did you choose it for the upgrade specifically?

A friend of mine gave the 6600t to me. I have a 600 watt power supply, and 1866 mhz DDR3 ram.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Aaralli said:

. I have a 600 watt power supply,

Make and model pls

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I need? ATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explained, group reg is bad

Link to comment
Share on other sites
Link to post
Share on other sites
  • 2 weeks later...
Posted
  • Author
On 3/23/2019 at 1:33 PM, fasauceome said:

Make and model pls

Unfortunately, I can't tell you right now what it is, but it had 80+ bronze certification and was bought in 2017. 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×