Agent181

Hello, I need help finding a reliable pcie usb card that is compatible with ryzen am4 platform. I had 2 sent from me from work and they did not work as they are older. Do any of you know or have pcie usb expansion cards that you recommend or know that work? Preferably a pcie usb expansion card with 4+ ports. The motherboard I have is the asrock x570 steel legend. Thanks for your help guys!

Only reason why I was looking at these is because they are $20 each near me from liquidation sites due to companies closing over the quarantine. I don't mind spending but I was wondering if they could be just enough to run extra monitors besides an APU.

Basically I need a system strictly for VPN, zoom calls, and video record (not production but recording straight into OBS and uploading to the cloud). I have an ASUS B450F motherboard, storage, case, but need a cpu/gpu and psu. The requirement I need is that it has to run 5 monitors so I was thinking of getting a APU (2200g-3400g) to use integrated graphics for 2 monitorsand picking up a low end card to run 3 other monitors.

This system isnt for games at all strictly work so a stronger card wouldnt be needed, thats why I was looking at these.

Which GPU would you guys say is better? Nvidia Quadro 2000 or NVIDIA Quadro NVS 510 I am making a workstation system and I have the option of getting one or the other. Which would be better of the two?

Update, I have 24gb of ram running. I know this is not efficient but its working for me right now. I tried every stick combination and they all work together but not 4 together.

I have the 2700x running at stock speeds, no overclocks done on my end at all. Only reason why I went with that 2x8 was since at the time I never needed more than 16gb until now. I'm guessing there is no going around this unless buying again right or running 3 sticks for 24 as that does work.

Hey all, I started having an issue of my 32 gb of ram not booting anymore so I tested all 4 sticks of 8 gbs alone in dual and one by one. They all work in separate combinations but not all 4 at once. So I swapped my Asus b450f for an ASRock x570 I had for another system and same issue followed. Any ideas on how to fix it? The 32 gb of ram were running fine for 5 months and then stopped working all of a sudden. It is the same as the link below except it's 2 black dims and 2 white dims. They are the same frequency, timings and model from Corsair that worked for a while until they stopped. https://www.amazon.com/dp/B0143UM4TC/ref=cm_sw_r_cp_apap_2WKOA4mAgFdNM Any help is appreciated, I am limiting what I do to not max out the 16 gb I have right now currently.

ugh, even for separate drones? I have 2 right now but going to make a 3rd later on. I wanted to keep the one I liked the most for fpv racing and test the waters edit: I'm giving the other 2 to my 2 brothers since they want in as well

Okay so I'm buying 2 controllers next month, the qx7 and the evolution, One for me and the other for my brother, he wants to get into racing too

Have any receivers you recommend, I'm running an sp racing f3 board

I want it for fpv racing and liftoff so I dont need the fancy things. Just fly do some racing, maybe some tricks before crashing and sims.

I saw that, I'm not a pincher, how is it compared to the i6? I'm trying to play liftoff too so I want it to work for that too. Also how is the receiver for it?

I have the drone printed with solid petg and it was strength tested to absorb the vibrations already. So staying away from spektrum then, its coming down to the FS-I6S and the Taranis Q X7. Are the receivers for the QX7 difficult to set up? I have the drone set up and wired for the FS ia6 that came with the bricked i6.

So my FlySky FS-i6 resulted in bricking and I have an option to get it replaced by the newer version Flysky FS-I6S, upgrade to the FrSky Taranis QX7 for $50 or look through the more expensive spektrum transmitter. The FS i6 never worked out of the box when I received it.Which one would be better? Also is Spektrum good? I have only heard about flysky and frsky.I'm using this for a custom 3D printed drone that I made for an engineering class. All tested and just needing a transmitter and receiver. Edit: they changed the upgrade price for the taranis from $20 to $50 >.>