monitor ASUS VG248QE not running 144hz With windows Recent update

[S1-]

About a day ago when i updated windows my Nvida Drivers working,

so i had to reinstall my Nvidia Drivers, but i had to reinstall it multiple time for it to work after finally working,

my VQ248QE monitor coudn't be recongized right it didn't display 144hz option in Windows Display Porperties or Nvida Panel

so i tried overclocking it to 144hz but the highest it can go was 135hz before there was artifacts

I tried changing ports, Fliping the display cable, Multiple restarts, Reinstalling Driver

but it doesn't show me These Options Below to access 144hz

 

[EnergyEclipse]

35 minutes ago, _PCBEGINNER_ said:

About a day ago when i updated windows my Nvida Drivers working,

so i had to reinstall my Nvidia Drivers, but i had to reinstall it multiple time for it to work after finally working,

my VQ248QE monitor coudn't be recongized right it didn't display 144hz option in Windows Display Porperties or Nvida Panel

so i tried overclocking it to 144hz but the highest it can go was 135hz before there was artifacts

I tried changing ports, Fliping the display cable, Multiple restarts, Reinstalling Driver

but it doesn't show me These Options Below to access 144hz

 

I did a bit of research into the monitor and it appears as though it has a HDMI 1.4 connector (1.4 only goes up to 120hz), a Display port 1.2 (1.2 only goes up to 60hz), and a DVI Dual Link (Which does do the full 1080p 144hz). 
 

My advice would be if you have a DVI Dual Link cable spare try using that.

 

Monitor's manual which lists all the connections:

https://dlcdnets.asus.com/pub/ASUS/LCD Monitors/VG248/VG248_English.pdf

 

I hope this helps! Good luck

[S1-]

I Sadly don't have Dual-Link DVI

[Glenwing]

3 hours ago, _PCBEGINNER_ said:

About a day ago when i updated windows my Nvida Drivers working,

so i had to reinstall my Nvidia Drivers, but i had to reinstall it multiple time for it to work after finally working,

my VQ248QE monitor coudn't be recongized right it didn't display 144hz option in Windows Display Porperties or Nvida Panel

so i tried overclocking it to 144hz but the highest it can go was 135hz before there was artifacts

 

I tried changing ports, Fliping the display cable, Multiple restarts, Reinstalling Driver

but it doesn't show me These Options Below to access 144hz

 

When you set a custom resolution, make sure you set the timing standard to CVT Reduced Blank.

 

2 hours ago, EnergyEclipse said:

I did a bit of research into the monitor and it appears as though it has a HDMI 1.4 connector (1.4 only goes up to 120hz), a Display port 1.2 (1.2 only goes up to 60hz), and a DVI Dual Link (Which does do the full 1080p 144hz). 
 

My advice would be if you have a DVI Dual Link cable spare try using that.

 

Monitor's manual which lists all the connections:

https://dlcdnets.asus.com/pub/ASUS/LCD Monitors/VG248/VG248_English.pdf

 

I hope this helps! Good luck

The VG248QE supports up to 144 Hz over DVI or DisplayPort, and is limited to 60 Hz over HDMI.

[S1-]

I’ve Tried Display port and different ports and cable but it not working

and im not sure about DVI since I don’t have dual-link