Jump to content

More VRM phases=better OC?

Max Cheung
 Share
Posted

So I read up some reviews last Friday about motherboards and there is this one thing that bothers me. 
More VRM phases=better overclocking?

Just hope for the community to answer this burning question on this. 
Thanks in advance. 


P.S. also hope for some good motherboard recommendations with the z370 chipset.

Link to comment
https://linustechtips.com/topic/977558-more-vrm-phasesbetter-oc/
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, Max Cheung said:

So I read up some reviews last Friday about motherboards and there is this one thing that bothers me. 
More VRM phases=better overclocking?

Just hope for the community to answer this burning question on this. 
Thanks in advance. 


P.S. also hope for some good motherboard recommendations with the z370 chipset.

 

Generally, yes.

 

The more VRM phases = more stable voltages = better overclocking results

Distributed over more VRMs = lower VRM temperatures = lower CPU socket area temperatures  = helps with higher overclocks.

 

What is your budget/price limit, and what currency (e.g USD, Euro, Canadian, etc)?

AMD Ryzen 9000 Rig

  • AMD R7 9800X3D + Alphacool CORE 1 w/ Performance Mount Kit + Thermal Grizzly AM5 Contact Frame
  • Gigabyte X870E Aorus Pro Ice
  • 32GB (16GB X2) G.Skill Trident Z5 Neo RGB DDR5-6400
  • Sapphire NITRO+ 6800 XT Special Edition + EKwb Full Cover Block
  • Custom Loop w/ 2x 360mm Radiators
  • WD SN850X + WD SN750 + Samsung 980
  • EVGA P2 850W + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL

AMD Ryzen 5000 Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel i7-8086K / Z390 Rig (Decommissioned Q2' 2025)

Intel i7-6800K / X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)
Intel i5-4690K / Z97 Rig (Decommissioned)

AMD FX-8350 / 990FX Rig (Decommissioned)

AMD Phenom II X6 1090T / 890FX Rig (Decommissioned)

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to post
Share on other sites
Posted

Yes but not necessarily. More weaker phases for example, might not be any better after all.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
11 hours ago, -rascal- said:

 

Generally, yes.

 

The more VRM phases = more stable voltages = better overclocking results

Distributed over more VRMs = lower VRM temperatures = lower CPU socket area temperatures  = helps with higher overclocks.

 

What is your budget/price limit, and what currency (e.g USD, Euro, Canadian, etc)?

A board around 2000HKD, around 250 or less. Z370 chipset, ATX form factor, as much features as possible.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×