Jump to content

High end gaming,modeling and video editing pc

iMDarker

Hello, i'm doing a build for gaming,streaming and modeling.

This is what i came up with so far: https://pcpartpicker.com/list/ngqNBb

Any improvements that can be made? What else do i need to install that liquid cooler in my case and will it fit?

The 2080ti i'm buying is the founders edition one from nvidia i just put the msi one because there were no others.

Link to comment
Share on other sites

Link to post
Share on other sites

That's a pretty solid build. I almost went for the same setup, but for Mobo I decided on EVGA Classified K because I was fed up with Asus customer support, but their products are still extremely solid. 

5 minutes ago, iMDarker said:

What else do i need to install that liquid cooler in my case and will it fit?

There's a couple youtube vids of people with the h700i and the kraken x62, so you're good. mounting hardware will come with your case, and/or with your radiator, so it's good to mount out of the box. 

That GDDR6 on the graphics card will help you greatly with your video editing, but expect people to be permalinking their own ideas for your build, saving money with the 1080 ti and all that.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 10 and Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

How many watts do I needATX 3.0 & PCIe 5.0 spec, PSU misconceptions, protections explainedgroup reg is bad

Link to comment
Share on other sites

Link to post
Share on other sites

Also I would get an after market card if possible the founder addition cards apparently run fairly hot. 

Link to comment
Share on other sites

Link to post
Share on other sites

18 minutes ago, iMDarker said:

Hello, i'm doing a build for gaming,streaming and modeling.

This is what i came up with so far: https://pcpartpicker.com/list/ngqNBb

Any improvements that can be made? What else do i need to install that liquid cooler in my case and will it fit?

The 2080ti i'm buying is the founders edition one from nvidia i just put the msi one because there were no others.

I would go with EVGA MB. They are amazing and have great customer support. For the GPU I will recommend EVGA as well rather than founder's edition. You can look up Jay's review about founder's edition vs EVGA card. EVGA card is significantly cooler than founder's. Besides that, I think it is a good build.

CPU i7 8700k MB  Asrock Z370 Killer SLI/ac GPU EVGA GTX1060 6 GB RAM 16GB DDR4 Gskill Ripjaw 3200 Mhz PSU EVGA SuperNova 750 G1+Storage 1x1TB WD Blue + 250GB WD Blue M.2 CASE Fractal design define C

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Rex_G said:

I would go with EVGA MB. They are amazing and have great customer support. For the GPU I will recommend EVGA as well rather than founder's edition. You can look up Jay's review about founder's edition vs EVGA card. EVGA card is significantly cooler than founder's. Besides that, I think it is a good build.

On Italy only 2080's are out on amazon and they're 4k each. That's why founders edition cards are the only way here atm

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, iMDarker said:

On Italy only 2080's are out on amazon and they're 4k each. That's why founders edition cards are the only way here atm

Oh ok, that might be a problem then. Will this help you?

https://eu.evga.com/products/productlist.aspx?type=0&family=GeForce+20+Series+Family&chipset=RTX+2080+Ti

CPU i7 8700k MB  Asrock Z370 Killer SLI/ac GPU EVGA GTX1060 6 GB RAM 16GB DDR4 Gskill Ripjaw 3200 Mhz PSU EVGA SuperNova 750 G1+Storage 1x1TB WD Blue + 250GB WD Blue M.2 CASE Fractal design define C

Link to comment
Share on other sites

Link to post
Share on other sites

Great build. Very similar to mine. I'd get the 240mm kraken though, the more cooling the better. 

i9 9900K/GSkill Trident RGB 4x8GB 3000Mhz/Asus Maximus X Hero/EVGA RTX2080TI XC ULTRA/Samsung 950pro+970pro nVME M.2 512gb/2x2tb ADATA ssd/3tb HDD/Corsair Obsidian 1000D/ EVGA SUPERNOVA T2 1600W/10xCorsair LL120/Alienware 34" 2k 120hz/LG 27" 4k 60hz/HyperX Alloy Elite RGB/Hyper X Pulsefire Surge RGB/SteelSeries Arctis Pro Wireless/Logitech c920.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×