Jump to content

Will my Power Supply works in another Country?

brisingr90
 Share
Posted

In 2016 I bought EVGA SuperNOVA 750, series 220-G2-0750-XR in Canada trough Amazon (here is the link https://www.amazon.ca/gp/product/B00IKDETOW)

Now I have to move out and back to Indonesia, which has different voltage at 220 V 50 Hz. Is it safe and works properly if I use it in Indonesia?

 

Thank you.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Yes. Newer PSUs like this automatically adapt to different voltages used in different countries. In fact, they are more efficient with higher input voltage.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Btw you might want to use a UPS when you get back. I heard from forum members there that the electricity there isnt stable.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

depends. If you look at the back of the PSU you might find a small switch to switch it to 220v. 

but ye. Most modern electronics do this automatically. 

CPU: AMD 3800X GPU: GTX 1080 Ti RAM: (16GB) 2x Corsair 8gb DDR4 3200Mhz Drives: SanDisk 240GB SSD, Samsung 500GB SSD, WD 1TB HDD

Motherboard: MSI X470 Gaming pro plus PSU: Gigabyte 650 watt Monitor(s): 27 inch AOC 1440p

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, dionkoffie said:

depends. If you look at the back of the PSU you might find a small switch to switch it to 220v. 

but ye. Most modern electronics do this automatically. 

The G2 has APFC

:)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
19 minutes ago, seon123 said:

The G2 has APFC

Automatic power factor correction is to deal with perceived versus real power (important in industrial sites), since power supplies have a large amount of capacitance in their mains side. It has nothing to do with automatically adapting to higher or lower voltages.

 

However @brisingr90, as others have stated here - almost every modern switched power supply can take a voltage range from 100 to 240V RMS. Higher voltages lead to greater efficiency on the supply side, but can also cause slightly higher ripple (transient current passing from the source side to the output side). 

 

Just to confirm, I checked on the EVGA website. Your supply will work fine - just remember to account for the different socket type

 

Power Specs

AC Input100 - 240 VAC, 10A, 50 - 60 Hz

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
9 hours ago, brisingr90 said:

In 2016 I bought EVGA SuperNOVA 750, series 220-G2-0750-XR in Canada trough Amazon (here is the link https://www.amazon.ca/gp/product/B00IKDETOW)

Now I have to move out and back to Indonesia, which has different voltage at 220 V 50 Hz. Is it safe and works properly if I use it in Indonesia?

 

Thank you.

Yes, just make sure your plug fits it and it will work fine. More efficiently, actually!

|PSU Tier List /80 Plus Efficiency| PSU stuff if you need it. 

My system: PCPartPicker || For Corsair support tag @Corsair Josephor @Corsair Nick || My 5MT Legacy GT Wagon ||

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×