TimeSpy 10,000

[bomerr]

Just upgraded from a 980 to a 1080 Ti. Hit 10,000 on TimeSpy with an OC. Wanted to share. Feelsgoodman

 

http://www.3dmark.com/compare/spy/2016305/spy/1933403

[WereCat]

8 minutes ago, bomerr said:

Just upgraded from a 980 to a 1080 Ti. Hit 10,000 on TimeSpy with an OC. Wanted to share. Feelsgoodman

 

http://www.3dmark.com/compare/spy/2016305/spy/1933403

Nice!

 

You crushed me with that CPU though.

http://www.3dmark.com/spy/1926938

 

GPU score is very close. My card can do 2038MHz max unfortunately... but VRAM flies at +700MHz offset.

[bomerr]

6 minutes ago, WereCat said:

Nice!

 

You crushed me with that CPU though.

http://www.3dmark.com/spy/1926938

 

GPU score is very close. My card can do 2038MHz max unfortunately... but VRAM flies at +700MHz offset.

My card only does 2012mhz. What bios are you using? I flashed it from reference to EVGA FTW3 and it increased my FPS substantially with the higher power limit. On memory I am running +650. I'll try 700 and see what happens. 

[WereCat]

2 minutes ago, bomerr said:

My card only does 2012mhz. What bios are you using? I flashed it from reference to EVGA FTW3 and it increased my FPS substantially with the higher power limit. On memory I am running +650. I'll try 700 and see what happens. 

I have the FTW3 ICX card and I use the Slave BIOS with 127% power limit.

Airflow in my case is quite bad though, 75°C - 80°C most of the time, results in clocks to fall down to 1960MHz range in load.

 

I ordered some additional fans for my case and delid tool for my CPU. I will try to break 11k GPU and 5k CPU score.

[bomerr]

11 minutes ago, WereCat said:

I have the FTW3 ICX card and I use the Slave BIOS with 127% power limit.

Airflow in my case is quite bad though, 75°C - 80°C most of the time, results in clocks to fall down to 1960MHz range in load.

 

I ordered some additional fans for my case and delid tool for my CPU. I will try to break 11k GPU and 5k CPU score.

Do you hit over 120% because my card doesn't want to go that high. I've only seen 121% max. 

 

My cases airflow is awful so I just keep the side door removed. 

[WereCat]

Just now, bomerr said:

Do you hit over 120% because my card doesn't want to go that high. I've only seen 121% max. 

No, never actually reached that far even with maxed out voltage to 1.093V which I don't use since it is still unstable at 2050MHz regardless.

[bomerr]

8 minutes ago, WereCat said:

No, never actually reached that far even with maxed out voltage to 1.093V which I don't use since it is still unstable at 2050MHz regardless.

Ya that's probably what they mean by it's voltage capped. I was thinking about flashing it with an unlocked voltage bios but my temps are too high with the SC Black cooler so I would need a water block to push it further to like 1.1v. 

[WereCat]

5 minutes ago, bomerr said:

Ya that's probably what they mean by it's voltage capped. I was thinking about flashing it with an unlocked voltage bios but my temps are too high with the SC Black cooler so I would need a water block to push it further to like 1.1v. 

Can you actually unlock voltage with BIOS mod on Pascal cards?

[bomerr]

5 minutes ago, WereCat said:

Can you actually unlock voltage with BIOS mod on Pascal cards?

Yes. XOC bios. 

 

http://www.overclock.net/t/1627212/how-to-flash-a-different-bios-on-your-1080-ti/0_100

[WkdPaul]

Locked.

 

This type of topic is better suited as a status update