No Boot Device recognized on new pc build using new ssd and win 10 flash drive

[Roofiedkoalas]

 

 

Hey guys, so i am trying to boot this pc i just assembled but it is telling me that there is no boot device recognized. At first it recognized only the optical drive so i swapped the sata and power cables that it was using to the ssd instead. It shows the msi and infinity 2.2tb screens but then skips to 'no bootable device found'. Win 10 is plugged into mobo usb slot. I tried plugging sata into port 1 as well as port 7 as the manual said that 7 and 8 are the sata6 ports. The kingston ssd is even recognized on the initial boot screen passes in 3 seconds, i plugged in a hdd and then they were both recognized on the brief boot device screen. If anyone has any ideas i would be super grateful, thanks guys.

 

mobo is Msi 760gma-p34 (fx)

cpu is 6300 FX

and a kingston 128g ssd

[Electronics Wizardy]

what the the boot menu set to in the bios?

 

 

[Billy_Mays]

You're lucky you didn't get a dead mobo from a bios update failure and you baught it brand new but try going into the bios and find the bootable devices and you should find your stuff in there 

[NinJake]

What is the size of the solid state drive?

[ravenshrike]

Must not do it, must not do it, must not do it... fuck it.

 

No Boot Device recognized on new pc build using new ssd and

win 10 flash drive

Well there's your problem.