Jump to content

Ryzen 5 1600 & 1080 ti?

louij2
By louij2
in Graphics Cards
 Share
Posted

Hi

Anyone have a Ryzen 5 1600 with a 1080 ti? I was thinking of upgrading from my 1050 ti to an RX 580 but no stock so now thinking to either get a 1080 ti or a new Vega equivalent card.

I wondering what performance is like with a card as powerful as the 1080 ti and if there are any limitations? I currently have a 1080p monitor but will use the graphics power for my video and photo editing.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you can wait for one or two months till Vega's launch then wait. If you cant then go 1080ti.

 

As for performance, jumping from 1050ti to 1080ti is like going from normal human to god. That's how much better. Limitations will be PSU.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, Jurrunio said:

If you can wait for one or two months till Vega's launch then wait. If you cant then go 1080ti.

 

As for performance, jumping from 1050ti to 1080ti is like going from normal human to god. That's how much better. Limitations will be PSU.

My PSU is Evga 650 G2 gold rated I know it might be the boundary 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, louij2 said:

My PSU is Evga 650 G2 gold rated I know it might be the boundary 

As long as you stick to using a single GPU it is enough.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
11 minutes ago, Jurrunio said:

Limitations will be PSU.

PShould have used "might" instead of "will" there :P

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
9 minutes ago, Jurrunio said:

PShould have used "might" instead of "will" there :P

i'm running a 7700k and a gtx 1080 off a 500 watt  so it should work dont expect much overclocking though 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Alaradia said:

i'm running a 7700k and a gtx 1080 off a 500 watt  so it should work dont expect much overclocking though 

no need to overclock

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I am also running a 1080ti and a 7700k on a 650W EVGA SuperNova G2 PSU. I can overclock them fine too, so I wouldn't worry about it unless you plan to run SLI.

 

1080 ti seems overkill for a 1080p monitor, but I guess you could get some use out of all that power during video editing. I don't think you need to worry too much about CPU bottlenecks. I would look up reviews of the 1600 and see how much you would gain by upgrading the CPU. My guess is it only matters at very high refresh rates.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 26/06/2017 at 0:09 PM, rasmuskrj said:

I am also running a 1080ti and a 7700k on a 650W EVGA SuperNova G2 PSU. I can overclock them fine too, so I wouldn't worry about it unless you plan to run SLI.

 

1080 ti seems overkill for a 1080p monitor, but I guess you could get some use out of all that power during video editing. I don't think you need to worry too much about CPU bottlenecks. I would look up reviews of the 1600 and see how much you would gain by upgrading the CPU. My guess is it only matters at very high refresh rates.

Yeah it is def overkill but I will probably get a 4k monitor at some point as all my footage and photos will look beautiful on it :x

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)

Doesn't 1600 bottleneck 1080ti?

sorry just checked out some information I don't know where it came out :D

Edited by SausageDoge
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If anything Bottlenecks, and WHAT bottlenecks, depensd on the software.

Do you play Cities skylines with a HUGE metropole? Yes, your CPU will bottleneck. Even an overclocked 8-core Intel will Bottleneck.

 

Do you play games like the Division, etc? Probably will be just fine.

 

Is your Monitor 60 Hz or 144 Hz?

 

1080p / 60 is idiotic to get a 1080 ti. You will NEVER get the full performance (since anything over 60 fps is useless).

Not smart too to use the GPU for video editing. If you render a Video over teh GPU, the Imagequality is lower than on CPU. That's why noone does that :P

 

 

But: If you have a 1080p / 60 Hz Monitor, you CAN still maike the 1080 ti work hard.

 

The magic word is: DSR.

Nvidia has Downsampling built in.

Activate DSR as a 4.0x Factor (4x the 1080p resolution is 4k), and set smoothness from 33% to 0%.

Since 4k is exactly 4x 1080p, or exactly 2x each site, the number is even. You don't need smoothing out. With 0%, and 4.0x it will look the sharpest.

That way you can enjoy 4k on a 1080p screen (will look much better than native 4k 1080p, but still not quite like native 4k)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, Darkseth said:

The magic word is: DSR.

Nvidia has Downsampling built in.

Activate DSR as a 4.0x Factor (4x the 1080p resolution is 4k), and set smoothness from 33% to 0%.

Since 4k is exactly 4x 1080p, or exactly 2x each site, the number is even. You don't need smoothing out. With 0%, and 4.0x it will look the sharpest.

That way you can enjoy 4k on a 1080p screen (will look much better than native 4k, but still not quite like native 4k)

Not sure if its a typo but it will not look better than a real 4k monitor. DSR is essentially the best form of anti aliasing you can do, but it's extremely resource intensive. You will see a significant reduction in jagged edges and aliasing artifacts(such as light reflecting on non-smooth surfaces). It does help a lot though and as mentioned it's a good way to get the most out of your card.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Sorry... Typo. Meant to say "will look better than native 1080p ,but worse than native 4k)" ^^"

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×