Pc not booting

[Savage Tech]

my rig is here I wanted to re-build my pc. it didn't display with or without the gpu I looked at photos of how the semi-modular psu was setup and still no display the I then tested a different gpu and the same one on a different system they both work finally i reset the cmos and now it isn't even turning on

The pc  https://pcpartpicker.com/user/masterkickass7/saved/bkWGXL

[themctipers]

reset cmos

take out your 2x4gb ram sticks

plug in all the cpu power pins, the 20+4 motherboard power, sata power to your ssd/hdds, and the 8 pin to your gpu (+6 pin if you have that, same with +8 pin)

plug in HDMI/Whatever to your GPU (not the motherboard)

 

make sure PC is shut down during this, with the power supply ticked off and power cable unplugged

[PCGuy_5960]

Dr. Debug code?

[Savage Tech]

Just now, PCGuy_5960 said:

Dr. Debug code?

55 no os and now nothing since it won't turn on

[paddy-stone]

The UPS has a maximum power draw of 330W according to it's spec, try without the UPS.

[PCGuy_5960]

Just now, Savage Tech said:

55 no os and now nothing since it won't turn on

This is what AsRock recommends:

Quote

The Memory could not be detected. Please re-install the memory and CPU. If the problem still exists, please install only one memory module or try using other memory modules.

 

[Savage Tech]

1 minute ago, PCGuy_5960 said:

This is what AsRock recommends:

 

nothing so far

[STUXNET]

Have you tried bread boarding your system to rule out that your board isnt being shorted? 

I had this same issue last month and it turned out to be a USB header from my front panel that was shorting my enitre system. 

Try booting while bread boarded with just the bare minimum hooked up.. PSU, GFX (if you dont have on-board video) and your CPU cooler as well as just one stick of RAM in slot 1 (check your mobo manual). 

 

Hopefully it'll boot!