[Need Help] My GIGABYTE GTX 1060 3G Rev 1.0 LED is not lighting up but the card work perfectly fine

[AdliAmirullah]

Hi there guys!

 

I'm new here, so bare with me 

 

I bought GIGABYTE GTX 1060 3G Rev 1.0 on 24/2/2017. After I mount it on my PC, I did all the check up on the card. The card work perfectly fine. However, the LED on "Gigabyte" and "Fan Stop" is not lighting up. So here's what I already did so far:

 

1. I tried to mount this card on other PC. The card's LED work just fine. Conclusion: The card is not broken

2. I updated all my OS and BIOS.

3. I installed GIGABYTE XTREME GAMING ENGINE but the light still won't turn on.

2. I went into BIOS and playing around with "Integrated device" setting. I found that the LED worked. BUT, after I shut down and waited for few minutes and reboot my PC, the LED is not lighting up again. I did toggle around the "Integrated device" setting in the BIOS few times and I get the same result. Which are: LED work just fine but once I shut down my PC and reboot it after few minutes, the LED is not lighting back up. 

 

Really glad if someone could help me with this.

 

My PC Details as follow (refer attachments for more details):

Intel i7 3770 Ivy Bridge

DDR3 2x4GB RAM

Alienware 06G6JW v.A14 Motherboard

GIGABYTE GTX 1060 3GB Rev 1.0

Silverstone 500W PSU

HDD 1TB

Cooler Master Hyper 103 CPU cooler

 

[Rohime]

I'd be checking the wires to the LED, not the software settings.

 

[JenjerBread]

1 minute ago, Rohime said:

I'd be checking the wires to the RGB, not the software settings.

 

but if it lights up then the wires shouldnt be the issue

[Rohime]

5 minutes ago, gchan985 said:

but if it lights up then the wires shouldnt be the issue

Oh - i missed the bit about the LED working fine on a different PC.