Jump to content

6700k 4.6ghz @ 1.34v Normal Temps?

Inrix
By Inrix
in CPUs, Motherboards, and Memory
 Share
Go to solution Solved by Thony,

Well according to Jay and Paul 1.35 is maximum they would ever go for 24/7 use.

 

70 sounds fine and if higher rpm on cooler dont cut it then u might want to go down to 4.5Ghz if you want lower temps.

 

 

Posted

Is this normal temps for a 4.6ghz oc on the 6700k with 1.34v while running aida64? I'm using a AIO but with low rpm fans so a bit less cooling but much quieter... Is it safe to run it at this temp?

 

4f1d406fa72012a79c60d58768d11c22.png

~ Main Rig ~

- Ryzen 9 3950X 16 Core 32 Threads - EVGA 3090 KINGPIN HYBRID - 32GB DDR4 3600mhz - 

- 6TB SSD Array + 2TB MP600 NVME Gen4 Boot - 

- Gigabyte X570 AORUS MASTER - Lian li O11 Dynamic XL - NZXT Kraken X73 + 16 Noctua NF-A12x25 Fans - 

 

~ Accessories ~

- Logitech G915 + G903 - LG C9 OLED - PG279Q 27'' [1440p 165hz G-Sync] +  PG27AQ27'' [4k 60hz G-Sync] -
- 2x 1440p Portrait 25'' Dell - DT 990 Pro Headphones -

 

~ Servers ~

- 100TB NAS + Server's w/ 6700k - 32 + 64GB Ram - NVME Boot - Gigabit Unlimited Fiber -

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

80deg is on the high side, tone it down a bit or increase fan(s) speed

 

how does it behave in normal daily tasks?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, zMeul said:

80deg is on the high side, tone it down a bit or increase fan(s) speed

 

how does it behave in normal daily tasks?

Idle at 50c ish and running a game is around 60-70

~ Main Rig ~

- Ryzen 9 3950X 16 Core 32 Threads - EVGA 3090 KINGPIN HYBRID - 32GB DDR4 3600mhz - 

- 6TB SSD Array + 2TB MP600 NVME Gen4 Boot - 

- Gigabyte X570 AORUS MASTER - Lian li O11 Dynamic XL - NZXT Kraken X73 + 16 Noctua NF-A12x25 Fans - 

 

~ Accessories ~

- Logitech G915 + G903 - LG C9 OLED - PG279Q 27'' [1440p 165hz G-Sync] +  PG27AQ27'' [4k 60hz G-Sync] -
- 2x 1440p Portrait 25'' Dell - DT 990 Pro Headphones -

 

~ Servers ~

- 100TB NAS + Server's w/ 6700k - 32 + 64GB Ram - NVME Boot - Gigabit Unlimited Fiber -

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Inrix said:

Idle at 50c ish and running a game is around 60-70

70deg is not bad

 

what are you using for cooling that CPU?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, zMeul said:

70deg is not bad

Yea, was thinking it might be ok to run it at that since I dont do much premiere which is the only thing I know that pushes it to around 80 deg... Ialso just dropped the core voltage down to 3.3 and it just failed.... Ill reboot at 3.35 and see if thats stable.

~ Main Rig ~

- Ryzen 9 3950X 16 Core 32 Threads - EVGA 3090 KINGPIN HYBRID - 32GB DDR4 3600mhz - 

- 6TB SSD Array + 2TB MP600 NVME Gen4 Boot - 

- Gigabyte X570 AORUS MASTER - Lian li O11 Dynamic XL - NZXT Kraken X73 + 16 Noctua NF-A12x25 Fans - 

 

~ Accessories ~

- Logitech G915 + G903 - LG C9 OLED - PG279Q 27'' [1440p 165hz G-Sync] +  PG27AQ27'' [4k 60hz G-Sync] -
- 2x 1440p Portrait 25'' Dell - DT 990 Pro Headphones -

 

~ Servers ~

- 100TB NAS + Server's w/ 6700k - 32 + 64GB Ram - NVME Boot - Gigabit Unlimited Fiber -

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
6 minutes ago, zMeul said:

70deg is not bad

 

what are you using for cooling that CPU?

Sorry for not answering before, Had to bump it back up to 1.34v, im using a h100iv2 but with custom fans, I could probably hit lower temps with the default ones but these are just too quiet to give up.

~ Main Rig ~

- Ryzen 9 3950X 16 Core 32 Threads - EVGA 3090 KINGPIN HYBRID - 32GB DDR4 3600mhz - 

- 6TB SSD Array + 2TB MP600 NVME Gen4 Boot - 

- Gigabyte X570 AORUS MASTER - Lian li O11 Dynamic XL - NZXT Kraken X73 + 16 Noctua NF-A12x25 Fans - 

 

~ Accessories ~

- Logitech G915 + G903 - LG C9 OLED - PG279Q 27'' [1440p 165hz G-Sync] +  PG27AQ27'' [4k 60hz G-Sync] -
- 2x 1440p Portrait 25'' Dell - DT 990 Pro Headphones -

 

~ Servers ~

- 100TB NAS + Server's w/ 6700k - 32 + 64GB Ram - NVME Boot - Gigabit Unlimited Fiber -

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, Inrix said:

Sorry for not answering before, Had to bump it back up to 1.34v, im using a h100iv2 but with custom fans, I could probably hit lower temps with the default ones but these are just too quiet to give up.

try and set up a push-pull config while maintaing same low fan speeds - might knock off just enough degrees

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

Well according to Jay and Paul 1.35 is maximum they would ever go for 24/7 use.

 

70 sounds fine and if higher rpm on cooler dont cut it then u might want to go down to 4.5Ghz if you want lower temps.

 

 

Connection: 200mbps / 12mbps 5Ghz wifi

My baby: CPU - i7-4790, MB - Z97-A, RAM - Corsair Veng. LP 16gb, GPU - MSI GTX 1060, PSU - CXM 600, Storage - Evo 840 120gb, MX100 256gb, WD Blue 1TB, Cooler - Hyper Evo 212, Case - Corsair Carbide 200R, Monitor - Benq  XL2430T 144Hz, Mouse - FinalMouse, Keyboard -K70 RGB, OS - Win 10, Audio - DT990 Pro, Phone - iPhone SE

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×