Jump to content

DIS PC Desk | All-In Envy

AlexCom
By AlexCom
in Build Logs
 Share
Posted

Hello community,

 

This is my first official buildlog that I do.. so please let me know of any feedback. Here we go:

 

This is a project that I started about two years ago, and a few prototypes over and here it is! It`s a build I`m doing for a client, themed black, grey and green. I`ll show progress of cutting, drilling, painting, bending and all sorts of stuff that I do, maybe even a nice video montage if I don`t screw things up.

 

I`ll start with a naked photo.. of the desk !

8vznHr9.jpg

 

As the Z170A XPOWER GAMING TITANIUM EDITION doesn`t have a I/O shield I modeled and 3d printed one! Painting it soon.

r1hCXne.jpg

 

Testing the fit for the nVidia 980 video cards + the mobo + the PCI express cables.

vjPCfeE.jpg

 

Also, clean lines of Stainless Steel ^.^

 

QcEW2Mv.jpg

 

I`ll update as soon as possible!

 

Have a great day,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Hey!

 

@NaLu thank you!

 

Got a bit of time today to test all the hardware (except RAM, they haven`t arrived yet) for any DoA`s. Everything works! Some shots of the hardware that will be used, bellow!

 

Here are all the specs:

 

Processor: i7 6700K , GPU: 2x nVidia 980 Strix, MB: MSI Z170A XPOWER GAMING TITANIUM Edition, RAM: Hyper X Savage 32 GB

 

Some images taken during the test:

 

d5ekIZc.jpg

 

0jRhyh1.jpg

 

Will update more during the week.

 

Alex

 

 

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Today I managed to install the LED strips!

 

Some images with the LEDs in place:

 

Zw6Znl4.jpg

 

k4UOB5M.jpg

 

Qbjpplg.jpg

 

8uju96J.jpg

 

Hope you like the result!

 

Have an awesome day,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

looking nice! 

curious, any chance I could get the file for the IO cover? 

Silverstone FT-05: 8 Broadwell Xeon (6900k soon), Asus X99 A, Asus GTX 1070, 1tb Samsung 850 pro, NH-D15

 

Resist!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Really good! LEDs looks amazing!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Paint job looks neat :) 

[Case Mod] Operation: The Division --- > Here

[CUSTOM WATER COOLED TABLE] Project: Ravage ---> Here

-== QUOTE ME IN YOUR REPLY IF YOU WANT ME TO RESPOND ==-

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@Heesleemer yes, I have to tweak it just a bit so it fits perfectly, in a few days I`ll post it here and tag you along.

 

@NaLu , @ClownFace1511 , thanks so much!

 

Package from EK arrived... professionalism at it`s best!

 

lUoJegw.jpg

 

Can`t wait to start working on it for real. Tomorrow I`ll test the aircooling capabilities of the desk, will post some pictures and some temps.

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm liking the look of that desk.

Check out my YouTube channel here and don't forget to subscribe :D

Current build: Project Athena

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@nmil thank you!

 

Today I was testing the airflow capabilities of the "All-In" with aircooling, both for the CPU and the GPU. Could not resist taking some shots of the new cables from http://www.icemodz.eu ! They are one of THE BEST sleeving company I have ever seen. I still need to train the cables, but they look great even just out of the box. Hope you enjoy!

 

Results are ok, glass is heating up a bit where the small cooler is blowing out the air, but I think that could be avoided with a AIO, if someone whats it with aircooling for the video cards.. regions where the GPU`s are are barely warm, but that is to be expected on air.

 

fT366Nx.jpg

 

Hope you like the progress! Will be posting more soon.

 

Take care,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Holy mother of all modders! Follow! :D

Main Rig - AMD Ryzen 1800X @ 3.9 - NZXT Kraken X62 - MSI X370 SLI PLUS - G.Skill TRIDENT Z RGB 16GB 2667MHz - 2 x Gigabyte GeForce GTX1080 WindForce OC - NZXT S340 (Purple-White) - OCZ 120GB, Seagate 1TB - Corsair RM750i 80+ Gold - SAMSUNG S24D590 24", HP L1950g - Logitech G810 Orion Spectrum - Logitech G502 Proteus Spectrum - Creative Cambridge Sound Works + two random Philips speakers, Logitech G430 headset - Win 10 Pro x64

Retro Gaming PC - ASUS T3

Server - HP ProLiant DL380 G6(Currently assembling it) - 2 x Intel Xeon E5520 2.26GHz 8MB Quad Core Processor

NAS - Zyxel NSA320S 2 x Seagate Constellation ES 2TB(RAID1) - QNAP TS-212 1 x 500GB

 

-=Logitech FanBoiiiiiiii=-

I love NZXT as well <3

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thank you @Marine_Boy ! I really appreciate the follow!

 

After the aircooling test I removed all the hardware and started to get my hands a bit dirty with some drilling, still a bit more to do(like for the GPU`s and for some cables)... These will be the pump mounting holes. The original ones were for the old style of the pump, they will get covered up by the new style of pump mount. Props to EK Water Blocks for providing a hole drilling guide, saves the time of measuring.

 

6QpCEqp.jpg

 

Will be posting more soon!

 

Have a great day,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Streamed the process of the mounting the waterblocks! Right card will stand of its "back", not like this, but I have to drill some holes before I can mount it like that, until then, here is a pic!

TlKQxkb.jpg

More updates soon!

 

Take care,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, AlexCom said:

Streamed the process of the mounting the waterblocks! Right card will stand of its "back", not like this, but I have to drill some holes before I can mount it like that, until then, here is a pic!

More updates soon!

 

Take care,

 

Alex

How will you SLI?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@rowanhazard Right card will be facing the other way(they will have custom backplate and front plate as well), then the bridge ports will be closer together. I hope to make custom sli bridges for future builds.

 

Have a good day,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, AlexCom said:

@rowanhazard Right card will be facing the other way(they will have custom backplate and front plate as well), then the bridge ports will be closer together. I hope to make custom sli bridges for future builds.

 

Have a good day,

 

Alex

Oh ok. Thanks!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@rowanhazard sure, my pleasure!

 

Preparing for some cutting and drilling... 

 

8CH7v7e.jpg

 

More updates soon!

 

Have a good day,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

All components present! Tomorrow I resume my PETG bending, let's hope the fire nation won't attack!

 

Vr4RGJJ.jpg

 

cubC5ZH.jpg

 

KyvXw7M.jpg

 

uxhRy5f.jpg

 

Had a little fun photographing and filming the presentation. Hope you enjoy!

 

Have a great day,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you don't mind me asking, what is the baseline price for this desk?

 

Thanks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@rowanhazard Price is not final yet since I need to discuss it with some people, but if you are interested, please leave me a direct message and we`ll continue conversation there.

 

Take care,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Everything(almost) should be installed!

 

Just a quick test with the LED`s on, one LED is missing from the video card that is facing down. Will install that later on.

 

Hope you like the pics, I will have more tomorrow when it`s daylight (I don`t have studio lights :/ )

 

uQX157Y.jpg

 

Ejai6F4.jpg

 

Take care,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Work in progress(that`s why it`s a mess), things left to do, one more bend and finish off cable management... tomorrow morning, leak test!

 

73q0sjB.jpg

 

Hope you like it and have a great weekend,

 

Alex

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Short teaser of leak testing the loop: 

 

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i love that 3d printed IO cover, any way i might get a .stl file of it to print it for myself?

On 5/7/2016 at 1:36 PM, AlexCom said:

As the Z170A XPOWER GAMING TITANIUM EDITION doesn`t have a I/O shield I modeled and 3d printed one! Painting it soon.

 

Pellet Stove

Spoiler

CPU - I7 6700k l CPU Cooler - Noctua NH-D15 l GPU - MSI GTX 1080 Gaming Z l Mobo - MSI Gaming Pro Carbon l RAM - 16GB @ 2666 Corsair Vengeance LPX DDR4 l PSU - Corsair RM850i l SSD - Samsung 850 Evo 250GB | HDD - Toshiba 2TB | Case - Cooler Master HAF XB EVO W/ LTT Noctua NF-F12s l OS - Windows 10 l Mouse - Azio Levetron GM2000 l KeyBoard - Corsair K95 RGB l

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

@Pbr38 yep, here it is (attached). When you print it, just to make sure 100% that it`s at the right scale, the object measures exactly 171.513mm in length.

cover.STL

More info about DIS All-In PC DESK here: www.DISpc.net

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Build Logs

×