Are these good temps?

[Joe3417]

I have a 3770k at 4.2. Using a h100i to cool it. Running prime 95 max temps were 67c. Good or should it be better? .. also using arctic silver 5

[_ASSASSIN_]

that's perfectly fine, although for a Liquid cooling solution, that's rather high, might want to increase the RPM somehow

[Godlygamer23]

How much voltage is being applied?

[Joe3417]

How much voltage is being applied?

my motherboard has this thing called oc genie which overclocks to 4.2 at the click of a button..I use this because I do not know how to overclock...but I did check what voltage it was doing in the bios and it is on auto

[austin541]

on prime 95 those are good temps. prime 95 puts more stress that you will get in the real world. 

 

how long did you run it for.

Edited September 8, 2013 by austin541

[Joe3417]

on prime 95 those are good temps. prime 95 puts more stress that you will get in the real world.

how long did you run it for.

about 10 minutes

[Godlygamer23]

my motherboard has this thing called oc genie which overclocks to 4.2 at the click of a button..I use this because I do not know how to overclock...but I did check what voltage it was doing in the bios and it is on auto

Do you have CPU-Z installed? Use that to monitor the voltage while the CPU is being stressed.

[austin541]

the temps are ok but 10 minutes is kinda quick for 67 i might re seat the cooler and reapply the thermal paste.

[Joe3417]

the temps are ok but 10 minutes is kinda quick for 67 i might re seat the cooler and reapply the thermal paste.

I'll retest it...how long should I run it

[austin541]

an hour if it goes above 80c stop and come back to the thread. 

[Joe3417]

Do you have CPU-Z installed? Use that to monitor the voltage while the CPU is being stressed.

1.1859v

[Joe3417]

an hour if it goes above 80c stop and come back to the thread. 

running it right now

[Godlygamer23]

What program are you using to monitor temperatures?

[austin541]

are you using hwmonitor. 

[Godlygamer23]

I just stress tested my 3570K for you using Prime. Maximum temperatures were 67 degrees C on Core #1. I'm running a Kraken x60 as well, which performs a bit better than the H100i.

Specs on my overclock are as follows:

Frequency: 4.4GHz

Voltage: 1.256

[Joe3417]

are you using hwmonitor. 

 

What program are you using to monitor temperatures?

core temp and my motherboard has a led that tells you cpu temp

[Henry]

Try using IC Diamond, might lower temps by a few C.

[WoodenMarker]

my motherboard has this thing called oc genie which overclocks to 4.2 at the click of a button..I use this because I do not know how to overclock...but I did check what voltage it was doing in the bios and it is on auto

Oc Genie is meh. Use Click Bios.

[Leonard]

You have not given your ambient temperature and the voltage of your overclock but i still find it to be high for a 4.2ghx OC on load. If your temperature was say 55C on load i would be ok with that considering it is a H100i.  

[CoolBeans]

As long as you don't go above 80 on prime 95 you should be fine

[Godlygamer23]

As long as you don't go above 80 on prime 95 you should be fine

Overall, yes. But your overclock temps should be within a temperature zone.

[austin541]

how did your hour long test go.