PSU Shroud Phantom 410

[ToniBamboni]

I'm totally new to but I want to build a Shroud similar to the s340 and h440. How would I go about doing this? What materials do I need?

And what steps should I follow?

[The Official Czex]

http://linustechtips.com/main/topic/407754-modding-faq-common-mods/

 

PSU shroud mod is in there.

 

@W-L

[NinjaJc01]

Buy some sheet aluminum (Intentionally spelling it wrong for Americans here), bend it and paint it. Done.

[W-L]

I'm totally new to but I want to build a Shroud similar to the s340 and h440. How would I go about doing this? What materials do I need?

And what steps should I follow?

 

Basically the linked guide would have what you need but in general you can make the shroud out of either acrylic or sheet metal whichever is more readily available or easier for you to work with. Making a cardboard template to start would be good to get the right dimensions and size for the cutouts around parts of the case.

[AlwaysFSX]

Get a sheet of metal, measure to fit, bend, and rivet or weld it in to the case.

[AlwaysFSX]

Okay so looking at my case your best bet would be to bend the sheet of metal as shown, and use screws to hold it in place. Simply because you won't be able to get to the power supply with it welded or riveted in and would need some system to remove it. On the motherboard tray you can screw the shroud in from the back. From the bottom of the case you can screw it in from the inside or from the bottom of the case, but that's a bit pointless and more of a pain. So you'd probably want to have the screws inside.

 

 

Could add more pictures/details in if you want to attempt the mod this way, but it's what I feel would do best just looking at the space myself.

@ToniBamboni