Jump to content

Speccy thread!

Muz
By Muz
in General Discussion
 Share
Posted

It's time for a speccy thread, post away!

 

9bb257c3e2e27867a0782dde0c94e884.png

- CPU: Intel i7 3770 - GPU: MSI R9 390 - RAM: 16GB of DDR3 - SSD: Crucial BX100 - HDD: Seagate Barracuda 1TB -

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Vp0NpwR.png

 

The 3930k is overclocked to 4.4 GHz.

PC Specs: CPU: Intel Core i7 3930K OC @ 4.4 GHz | CPU Cooler: Corsair H105 | Motherboard: ASUS Sabertooth X79 | GPU: 2x SLI Gigabyte GTX 760 | RAM: Mushkin Redline 2x4GB 1866 | Case: Cooler Master HAF X | PSU: SeaSonic X Series 750W | Storage: A-Data XPG 120GB  & WD Blue 1TB | OS: Arch GNU/Linux || PC Part Picker & 3D Mark Score

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

awww yeaa

time to post my specs

specs.jpg?t=1304951150

this is the best specs out there lol

OFF TOPIC: I suggest every poll from now on to have "**CK EA" option instead of "Other"

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

PC is in "silent mode" where I literally cannot hear the fans.

RAM is a temporary set because I need to RMA my 32GB kit. Again.

attachicon.gifSpeccy.PNG

Did you OC your 3930k?

If so, what speed and voltage?

PC Specs: CPU: Intel Core i7 3930K OC @ 4.4 GHz | CPU Cooler: Corsair H105 | Motherboard: ASUS Sabertooth X79 | GPU: 2x SLI Gigabyte GTX 760 | RAM: Mushkin Redline 2x4GB 1866 | Case: Cooler Master HAF X | PSU: SeaSonic X Series 750W | Storage: A-Data XPG 120GB  & WD Blue 1TB | OS: Arch GNU/Linux || PC Part Picker & 3D Mark Score

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Untitled-1_zpsdgnrgm7g.jpg

 

4.5GHz on the 3770k

i know someone with an 8GHZ clock on his amd

it wrecks ur card

at everything

HEUEHRUEHREUHR

OFF TOPIC: I suggest every poll from now on to have "**CK EA" option instead of "Other"

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Did you OC your 3930k?

If so, what speed and voltage?

I have it back to stock because this damn thing is a power hungry monster. I had it to 4.6-4.7ghz (I think) at 1.35v (I think) but for whatever reason the GPU started artifacting on the DVI monitor. Everything ran fine and I got over 13,000 in passmark. Didnt even hit 70 degrees. I do have my main monitor overclocked though!

Donate your unused computer resources for cancer and other research. For Zinsey ❤

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

PC is in "silent mode" where I literally cannot hear the fans.

RAM is a temporary set because I need to RMA my 32GB kit. Again.

 

Well no matter how quite your liquid cool system is...the HDD will always make a sound...which is a problem I face late at night 

PC Build: Project Re-Define | Project Mochii | Personal Rig v3

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Server 2012.. Because I can. Deal with it.

 

The feeling when you forget to attach picture....

post-190701-0-64868400-1444455913.png

Pls Follow your own posts!      Chief Engineer for my School Studio, Own my own Home Studio also. I also do requests for Remixing songs too :D Storage Server: Mobo: Supermicro X8SIA-F Case: Some Supermicro 1U case Drives: 3x 2TB Seagate Barracuda 7200 RPM drives, 1x 3TB Seagate Barracuda 7200 RPM CPU: Intel Xeon X3430 2.4GHz Ram: 2x Kingston ECC 2GB sticks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Well no matter how quite your liquid cool system is...the HDD will always make a sound...which is a problem I face late at night 

I cannot hear the HDD over this damn MCP 355. and the platters usually stop spinning after a while because the SSD is what I use for everything.

Donate your unused computer resources for cancer and other research. For Zinsey ❤

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

including power consumption, if more is what you are going for.

im kidding

amd cpu's are not for gaming

they are for throwing

but hey

thats jSUT A THEORY

A GAME THEORY

OFF TOPIC: I suggest every poll from now on to have "**CK EA" option instead of "Other"

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I have it back to stock because this damn thing is a power hungry monster. I had it to 4.6-4.7ghz (I think) at 1.35v (I think) but for whatever reason the GPU started artifacting on the DVI monitor. Everything ran fine and I got over 13,000 in passmark. Didnt even hit 70 degrees. I do have my main monitor overclocked though!

Damn nice, yeah it is power hungry lol. I got mine at 1.31v right now, I tried to get it to 4.5 but it ended up being stable all the way at 1.36v and I would rather keep the lower voltage and cooler temps at 4.4 GHz.

I just noticed the OC on my monitor was disabled, I should go re-enable that right now :P

PC Specs: CPU: Intel Core i7 3930K OC @ 4.4 GHz | CPU Cooler: Corsair H105 | Motherboard: ASUS Sabertooth X79 | GPU: 2x SLI Gigabyte GTX 760 | RAM: Mushkin Redline 2x4GB 1866 | Case: Cooler Master HAF X | PSU: SeaSonic X Series 750W | Storage: A-Data XPG 120GB  & WD Blue 1TB | OS: Arch GNU/Linux || PC Part Picker & 3D Mark Score

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I cannot hear the HDD over this damn MCP 355. and the platters usually stop spinning after a while because the SSD is what I use for everything.

 

True enough since the HDD will stop spinning, I usually set it at a 5-minute timer after I stop utilizing it. 

But I hear my two 7200RPM laptop HDD over my D5 pump...

PC Build: Project Re-Define | Project Mochii | Personal Rig v3

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I have it back to stock because this damn thing is a power hungry monster. I had it to 4.6-4.7ghz (I think) at 1.35v (I think) but for whatever reason the GPU started artifacting on the DVI monitor. Everything ran fine and I got over 13,000 in passmark. Didnt even hit 70 degrees. I do have my main monitor overclocked though!

 

Damn nice, yeah it is power hungry lol. I got mine at 1.31v right now, I tried to get it to 4.5 but it ended up being stable all the way at 1.36v and I would rather keep the lower voltage and cooler temps at 4.4 GHz.

I just noticed the OC on my monitor was disabled, I should go re-enable that right now :P

 

When I OC my monitor everything just looks fuzzy and kinda tinted yellow :( but at least I can run my games at 1440p on my 1080p monitor :D Thanks AMD VSR

Pls Follow your own posts!      Chief Engineer for my School Studio, Own my own Home Studio also. I also do requests for Remixing songs too :D Storage Server: Mobo: Supermicro X8SIA-F Case: Some Supermicro 1U case Drives: 3x 2TB Seagate Barracuda 7200 RPM drives, 1x 3TB Seagate Barracuda 7200 RPM CPU: Intel Xeon X3430 2.4GHz Ram: 2x Kingston ECC 2GB sticks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

21a0c78f502eb665195d683b594f0e62.png

 

The U28D590D is 4K, just running it at 4:3 for cs:go

// irenebb-pc v5 // [ღ] Intel i5-9400F [ღ] Radeon VII Lisa Su Edition [ღ] 24GB Crucial Ballistix [ღ] Acer ED323QUR (1440p/144hz) [ღ]

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

21a0c78f502eb665195d683b594f0e62.png

 

The U28D590D is 4K, just running it at 4:3 for cs:go

 

I want your build lol Do you have a log for it?

Pls Follow your own posts!      Chief Engineer for my School Studio, Own my own Home Studio also. I also do requests for Remixing songs too :D Storage Server: Mobo: Supermicro X8SIA-F Case: Some Supermicro 1U case Drives: 3x 2TB Seagate Barracuda 7200 RPM drives, 1x 3TB Seagate Barracuda 7200 RPM CPU: Intel Xeon X3430 2.4GHz Ram: 2x Kingston ECC 2GB sticks

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

21a0c78f502eb665195d683b594f0e62.png

 

The U28D590D is 4K, just running it at 4:3 for cs:go

 

A. Your 980 Ti is reporting only 2GB of ram...either you are running a Virtual machine or Speecy is glitched/bugged

B. I was about to ask where you got a 1920x1440 panel...but I read the last comment

PC Build: Project Re-Define | Project Mochii | Personal Rig v3

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

tNXZcia.png

 

 

View my profile to see the build. Watercooled!

 

Dat CPU temp

Pls Follow your own posts!      Chief Engineer for my School Studio, Own my own Home Studio also. I also do requests for Remixing songs too :D Storage Server: Mobo: Supermicro X8SIA-F Case: Some Supermicro 1U case Drives: 3x 2TB Seagate Barracuda 7200 RPM drives, 1x 3TB Seagate Barracuda 7200 RPM CPU: Intel Xeon X3430 2.4GHz Ram: 2x Kingston ECC 2GB sticks

Link to comment
Share on other sites
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing General Discussion

×