Jump to content

Most exciting live stream ever!

maxib7
By maxib7
in Off Topic
 Share
Posted

I don't know if someone posted about this or not yet. (Sorry if someone did)

 

But this: http://www.twitch.tv/luke_lafr

 

Luke is live streaming for idk how long but it's only just a 3d printer printing and almost 400 people are watching!!!! lol

 

That's right folks if you want to become a popular steamer I suggest you either point your camera at the wall or a moving object :P .

No... I'm not ready for my thread to die, not yet.... nooooo......

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

3D PRINTING A FIRE POLE!

 

 

wut

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Now if only my ISP wasn't discriminating against Twitch.

 

All other streaming services load, but twitch just sits and sits and sits and sits......

Ketchup is better than mustard.

GUI is better than Command Line Interface.

Dubs are better than subs

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

hey its made it farther than the last 2 attempts they tried btw they had to hot glue the power cord to the 3d printer so it wouldn't fall out

Spoiler

My system is the Dell Inspiron 15 5559 Microsoft Signature Edition

                         The Austrailian king of LTT said that I'm awesome and a funny guy. the greatest psu list known to man DDR3 ram guide

                                                                                                               i got 477 posts in my first 30 days on LinusTechTips.com

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Has anyone been watching the progress for a long time?

 

I just started watching and it seems like a clip on a loop.....

"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party."

-Ron White
 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

whats going on 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Has anyone been watching the progress for a long time?

 

I just started watching and it seems like a clip on a loop.....

Welcome to 3d printing 

muh specs 

Gaming and HTPC (reparations)- ASUS 1080, MSI X99A SLI Plus, 5820k- 4.5GHz @ 1.25v, asetek based 360mm AIO, RM 1000x, 16GB memory, 750D with front USB 2.0 replaced with 3.0  ports, 2 250GB 850 EVOs in Raid 0 (why not, only has games on it), some hard drives

Screens- Acer preditor XB241H (1080p, 144Hz Gsync), LG 1080p ultrawide, (all mounted) directly wired to TV in other room

Stuff- k70 with reds, steel series rival, g13, full desk covering mouse mat

All parts black

Workstation(desk)- 3770k, 970 reference, 16GB of some crucial memory, a motherboard of some kind I don't remember, Micomsoft SC-512N1-L/DVI, CM Storm Trooper (It's got a handle, can you handle that?), 240mm Asetek based AIO, Crucial M550 256GB (upgrade soon), some hard drives, disc drives, and hot swap bays

Screens- 3  ASUS VN248H-P IPS 1080p screens mounted on a stand, some old tv on the wall above it. 

Stuff- Epicgear defiant (solderless swappable switches), g600, moutned mic and other stuff. 

Laptop docking area- 2 1440p korean monitors mounted, one AHVA matte, one samsung PLS gloss (very annoying, yes). Trashy Razer blackwidow chroma...I mean like the J key doesn't click anymore. I got a model M i use on it to, but its time for a new keyboard. Some edgy Utechsmart mouse similar to g600. Hooked to laptop dock for both of my dell precision laptops. (not only docking area)

Shelf- i7-2600 non-k (has vt-d), 380t, some ASUS sandy itx board, intel quad nic. Currently hosts shared files, setting up as pfsense box in VM. Also acts as spare gaming PC with a 580 or whatever someone brings. Hooked into laptop dock area via usb switch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Wouldn't a fire pole be round?

Ketchup is better than mustard.

GUI is better than Command Line Interface.

Dubs are better than subs

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Has anyone been watching the progress for a long time?

 

I just started watching and it seems like a clip on a loop.....

 

After a pass, put your cursor right over the end pixel of one of the support spars. After a couple more, you'll see the print has grown some.

And the noise changes every couple passes on the bottom two legs.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

After a pass, put your cursor right over the end pixel of one of the support spars. After a couple more, you'll see the print has grown some.

And the noise changes every couple passes on the bottom two legs.

 

It actually just started doing something way different actually....

"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party."

-Ron White
 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Welcome to 3d printing 

 

I honestly wouldn't be surprised if Luke did do something like that.

 

Then brag about it on WAN show.....

 

 

God dangit Luke....

"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party."

-Ron White
 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Wait..... after a bit of progress everyones saying that the top is broken.

 

But look at it closer.

 

nOOczOi.png

What if it's a scaled down model of like a firepole playset? Whereas the top is the top floor and there is a firepole in the middle that a 3-d printed Linus doll can slide down?

 

That's my theory anyway.

"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party."

-Ron White
 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i went to sleep and it is still printing.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i am going to print my own fire poll :)

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Off Topic

×