900D to expensive, is HAF 935 Stacker good enough?

[Wesleydn]

I currently have a H440 with 360mm rad +240mm rad cooling my CPU +1 GPU

I noticed that when i added my GPu to the loop the temps went up and GPU would go to 62 under load with a full game of lockers on BF4.

I took everything out my pc and played another round and temps where 50 and would spike to 52 every now and then.

 

I think its because of the air flow.

So i thought why not look at a case where the rads are in another compartments and not blowing hot air into the case where the other components are.

 

The 900D is about $400 here

and the HAF 935 Stacker is about $200

 

Should i stick with H440?

Should i sell the H440 and spend an extra $60 to get the HAF stacker

Should i save and get the 900D?

Any other cases you recommend?

 

 

[Guest]

HAF cases in general feel very plasticy. Have you seen the new Thermaltake cases? I never was impressed by Thermaltake but their new Core series seem pretty good. As do the Phanteks stuff.

[Wesleydn]

HAF cases in general feel very plasticy. Have you seen the new Thermaltake cases? I never was impressed by Thermaltake but their new Core series seem pretty good. As do the Phanteks stuff.

Thermaltake is a brand i can get but doesnt look like we have the "new" cases yet, and specific case/s you recommend as their website has to many to look through.

[Sequence]

them temps are nothing to worry about remember you have to take into account ambient temps.

 would recommend the 900D it is great case but it is very expensive the phanteks cases make a great substitue for a 900d they are cheaper and offer alot of the same great features.

[Wesleydn]

them temps are nothing to worry about remember you have to take into account ambient temps.

 would recommend the 900D it is great case but it is very expensive the phanteks cases make a great substitue for a 900d they are cheaper and offer alot of the same great features.

Thats not an option as im in South Africa and phanteks isnt available here

[Wesleydn]

HAF cases in general feel very plasticy. Have you seen the new Thermaltake cases? I never was impressed by Thermaltake but their new Core series seem pretty good. As do the Phanteks stuff.

Im going for the following over the HAF and 900D

will cost me $50 extra, where the HAF is $60 extra

Thermaltake Core X9 

E-ATX Cube Chassis

http://www.thermaltakeusa.com/Chassis/Cube_Case_/Core/C_00002562/Core_X9/Design.htm

[Trik'Stari]

Thermaltake is a brand i can get but doesnt look like we have the "new" cases yet, and specific case/s you recommend as their website has to many to look through.

Core X9

http://www.newegg.com/Product/Product.aspx?Item=N82E16811133275

http://www.thermaltakeusa.com/products-model.aspx?id=C_00002562

 

Or maybe try the air 540. I've had nothing but good temps with mine.