Questions/Issues about Resent Build

[geoffreymmoore]

I've got a few questions about my build, I seem to be running extremely hot from this build. Below are the specs of the machine:

 

Case: Cooler Master Storm Stryker

Motherboard: MSI Z87-GD65 Gaming

CPU: Intel i7-4790K (of course)

CPU Cooler: Corsair H100i

RAM: Corsair Vangeance PRO 32 GB 2400MHz

Power supply: Corsair 650RM

BootDrive: SanDisk Extreme Pro 240GB in RAID0

Storage Drive: 2 x 6TB Seagate drives

GPU: MSI GTX 970 GAMING

 

 

Currently I'm not Overclocking the machine as I don't need to as of right now. Under a stress test my CPU temps were ranging from 93C on the highest core and 77C on the coolest core. I am located in an area where the average ambient temperature is about 70C. This machine will be used for quite a few heavy hitting apps for programming, video/photo editing, and a few other heavy programs. I need to figure this out as this machine is going to be running for the most part 24/7. Any help will be great.

 

Thanks in advance.

[Jerakl]

I kid you not, that is almost the exact same as my old rig before I switched cases.

 

Wait, your ambient temps average 70 Degrees Celsius? If it's that hot, you have a lot more to worry about then your PC O_O

[i_build_nanosuits]

 

I've got a few questions about my build, I seem to be running extremely hot from this build. Below are the specs of the machine:

 

Case: Cooler Master Storm Stryker

Motherboard: MSI Z87-GD65 Gaming

CPU: Intel i7-4790K (of course)

CPU Cooler: Corsair H100i

RAM: Corsair Vangeance PRO 32 GB 2400MHz

Power supply: Corsair 650RM

BootDrive: SanDisk Extreme Pro 240GB in RAID0

Storage Drive: 2 x 6TB Seagate drives

GPU: MSI GTX 970 GAMING

 

 

Currently I'm not Overclocking the machine as I don't need to as of right now. Under a stress test my CPU temps were ranging from 93C on the highest core and 77C on the coolest core. I am located in an area where the average ambient temperature is about 70C. This machine will be used for quite a few heavy hitting apps for programming, video/photo editing, and a few other heavy programs. I need to figure this out as this machine is going to be running for the most part 24/7. Any help will be great.

 

Thanks in advance.

 

your cooler is probably not seated properly there's an issue with how the mounting brackets are on the H100i i think @Faceman is able to help you figure this out when he come around.

[MrRavens]

Just recheck the cooler. Check which was your fans are oriented, so there is some balance (probably wont make it THAT bad, but worth a check).