Jump to content

CPU Cooler/thermal paste question.

Blueprint
By Blueprint
in Cooling
 Share
Posted

I installed the hyper 212 evo on my system very recently (an hour ago). The temps are looking good, 66 degrees max at 100% load (no overclock). When installing the cpu cooler I pressed it down onto the thermal paste on the processor and then raised it back again slightly and put it back down. Will this cause any problems, air bubbles etc?

 

Thank you,

Blueprint

 

 

Intel i7 4790k / MSI Z97M / Hyper 212 Evo / MSI Twin Frozr GTX 770 / 16GB Corsair Vengeance 1600MHz / Fractal Design Arc Mini R2 / Corsair CS750M / Samsung 840 Evo 250gb SSD /  WD Blue 1TB

Link to comment
https://linustechtips.com/topic/287096-cpu-coolerthermal-paste-question/
Share on other sites
Link to post
Share on other sites
Posted

I installed the hyper 212 evo on my system very recently (an hour ago). The temps are looking good, 66 degrees max at 100% load (no overclock). When installing the cpu cooler I pressed it down onto the thermal paste on the processor and then raised it back again slightly and put it back down. Will this cause any problems, air bubbles etc?

 

Thank you,

Blueprint

It'll be fine i imagine. 

Our Grace. The Feathered One. He shows us the way. His bob is majestic and shows us the path. Follow unto his guidance and His example. He knows the one true path. Our Saviour. Our Grace. Our Father Birb has taught us with His humble heart and gentle wing the way of the bob. Let us show Him our reverence and follow in His example. The True Path of the Feathered One. ~ Dimboble-dubabob III

Link to post
Share on other sites
Posted

No, that's not really an issue. The pressure will squeeze out any bubbles.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to post
Share on other sites
Posted
  • Author

It'll be fine i imagine. 

 

 

No, that's not really an issue. The pressure will squeeze out any bubbles.

 

 

No, you should be fine and your temps look good, too.

 

 

It can, but it usually won't, as long as you didn't entirely separate it you'll be fine.

Ok thank you. :)

Intel i7 4790k / MSI Z97M / Hyper 212 Evo / MSI Twin Frozr GTX 770 / 16GB Corsair Vengeance 1600MHz / Fractal Design Arc Mini R2 / Corsair CS750M / Samsung 840 Evo 250gb SSD /  WD Blue 1TB

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×