Jump to content

Is my CPU only running at half its speed? Valley shows it at 1.5Mhz

GuruMeditationError
 Share
Go to solution Solved by roberrrtz,

Brilliant, thanks. :0)

and when the trial period is over you can use occt

Posted

I have a Foxconn A7VMX-K with a 3200Mhz AMD Phenom II X4 955 but valley is reading the processor speed as 1500Mhz.

 

Is this normal? Shouldn't it top out at 3200Mhz?

"I try to put good out into the world...that way I can believe it's out there." --CKN                  “How people treat you is their karma; how you react is yours.” --Wayne Dyer            

[Needs Updating] My PC: i5-10600K @TBD / 32GB DDR4 @4000MHz / Z490 AORUS Elite AC / Titan RTX / Samsung 1TB 960 Evo / EVGA SuperNova 850 T2

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

it should be up to 3200mhz, have you looked into ur bios to see what going on in there. also what are the temps like?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm have a Foxconn A7VMX-K with a 3200Mhz AMD Phenom II X4 955 but valley is reading the processor speed as 1500Mhz.

 

Is this normal? Shouldn't it top out at 3200Mhz?

under load or while idling on the desktop?

| CPU: Core i7-8700K @ 4.89ghz - 1.21v  |  Motherboard: Asus ROG STRIX Z370-E GAMING  |  CPU Cooler: Corsair H100i V2 |
| GPU: MSI RTX 3080Ti Ventus 3X OC  |  RAM: 32GB T-Force Delta RGB 3066mhz |
| Displays: Acer Predator XB270HU 1440p Gsync 144hz IPS Gaming monitor | Oculus Quest 2 VR

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Valley has inaccurate readings

 

use othersoftware to take the CPU and GPU readings

Budget? Uses? Currency? Location? Operating System? Peripherals? Monitor? Use PCPartPicker wherever possible. 

Quote whom you're replying to, and set option to follow your topics. Or Else we can't see your reply.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thanks :0)

 

I just ran it in a window with Speedfan and it's nowhere near maxing out the CPU. Maybe valley's just not CPU intensive?

 

I've not checked out the bios yet. Valley's just showing the processor speed to have topped out at 1400Mhz but Speedfan is showing lots of deviation and it's not maxing out any of the cores.

"I try to put good out into the world...that way I can believe it's out there." --CKN                  “How people treat you is their karma; how you react is yours.” --Wayne Dyer            

[Needs Updating] My PC: i5-10600K @TBD / 32GB DDR4 @4000MHz / Z490 AORUS Elite AC / Titan RTX / Samsung 1TB 960 Evo / EVGA SuperNova 850 T2

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Uhhh...Unigine Valley is a GPU, Graphics Card, benchmark.

Not a CPU benchmark.

It even says this on the Unigine homepage...

"Valley Benchmark is a new GPU stress-testing tool..."

-https://unigine.com/products/valley/

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K @ 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I know, it just seems strange to me that the reading for the CPU should be showing a level 1400Mhz. It seems odd.

 

Also the O.S. is showing the cpu as unrecognised which was making me worry it might not be just a bios problem (the current cpu was added to the tested compatible list for the motherboard as a revision but there's been no bios revision).

 

I've looked at the bios but I can't see anything that would be stopping it from running at full steam.

 

I stress tested it with Prime95 and it maxed out all four cores but it runs cooler running Prime95 than it does valley. I can only imagine it's the heat from the graphics card that's causing a general rise in system temperature. Depending on fan noise I might switch to an extractor type gpu heatsink, rather than the open silent heatsink. It may even stop the case fans from ramping up, although I think that might just be a faulty sensor.

"I try to put good out into the world...that way I can believe it's out there." --CKN                  “How people treat you is their karma; how you react is yours.” --Wayne Dyer            

[Needs Updating] My PC: i5-10600K @TBD / 32GB DDR4 @4000MHz / Z490 AORUS Elite AC / Titan RTX / Samsung 1TB 960 Evo / EVGA SuperNova 850 T2

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

try Aida64.

 

Brilliant, thanks. :0)

"I try to put good out into the world...that way I can believe it's out there." --CKN                  “How people treat you is their karma; how you react is yours.” --Wayne Dyer            

[Needs Updating] My PC: i5-10600K @TBD / 32GB DDR4 @4000MHz / Z490 AORUS Elite AC / Titan RTX / Samsung 1TB 960 Evo / EVGA SuperNova 850 T2

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

Brilliant, thanks. :0)

and when the trial period is over you can use occt

Cpu: Intel i7-5930k Mobo: Asus Rampage V Extreme Ram: G.skill Ripjaws 4 4x4gb 2666mhz Gpu: Gigabyte GTX 970 G1 Gaming 
PSU: Evga Supernova G2 850W Storage: Samsung 850 Pro SSD 512gb Case: Phanteks P400S CPUcooler: Corsair H110 OS: Win 8.1

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×