CHC 122 Chipset WaterBlock, Fittings

[alleyn321]

Hi LinusTechTips people!

 

 

Im about to get the CHC 122 Chipset ( http://www.overclockers.co.uk/showproduct.php?prodid=WC-017-KA )

and Im wondering if its possible to fit these fittings on it

 

http://www.overclockers.co.uk/showproduct.php?prodid=WC-213-XS&tool=3    90 Degrees 

http://www.overclockers.co.uk/showproduct.php?prodid=WC-211-XS    45 Degrees 

[airdeano]

Hi LinusTechTips people!

 

 

Im about to get the CHC 122 Chipset ( http://www.overclockers.co.uk/showproduct.php?prodid=WC-017-KA )

and Im wondering if its possible to fit these fittings on it

 

http://www.overclockers.co.uk/showproduct.php?prodid=WC-213-XS&tool=3    90 Degrees 

http://www.overclockers.co.uk/showproduct.php?prodid=WC-211-XS    45 Degrees 

 

it'll be tight installing the second fitting (22mm diameter) as the spread of the

G1/4" holes are very narrow (close) assuming those fittings in the picture are

1/2" barb fittings leaving not much space if the base is 5/8" or 3/4". you'll prolly

end up having to purchase and test yourself, unless you can contact the vendor

and ask if they can shed some light on the issue. honestly, i'd pass on anything

over 1/2" OD.

[alleyn321]

it'll be tight installing the second fitting (22mm diameter) as the spread of the

G1/4" holes are very narrow (close) assuming those fittings in the picture are

1/2" barb fittings leaving not much space if the base is 5/8" or 3/4". you'll prolly

end up having to purchase and test yourself, unless you can contact the vendor

and ask if they can shed some light on the issue. honestly, i'd pass on anything

over 1/2" OD.

 

Thanks Airdeano!

I already contacted the "Seller's forum" and waiting for Response

 

 

 

Update: If you know any better Chipset Waterblock that can fix Compressions Fittings let me know! ( Black chrome , Silver )

[airdeano]

If you know any better Chipset Waterblock that can fix Compressions Fittings let me know! ( Black chrome , Silver )

 

i've used the Watercool chipset blocks with 5/8" OD compression fittings with success.

http://shop.watercool.de/epages/WatercooleK.sf/en_GB/?ObjectPath=/Shops/WatercooleK/Categories/Wasserk%C3%BChler/MB_Kuehler/Chipsatz

 

your location may have them locally or purchased from Watercool.

[alleyn321]

i've used the Watercool chipset blocks with 5/8" OD compression fittings with success.

http://shop.watercool.de/epages/WatercooleK.sf/en_GB/?ObjectPath=/Shops/WatercooleK/Categories/Wasserk%C3%BChler/MB_Kuehler/Chipsatz

 

your location may have them locally or purchased from Watercool.

 

I have seen these before. I thought they are CPU Water Blocks ( Lower grade for low/medium range CPUs )

 

I think I will go with this one http://www.aquatuning.co.uk/water-cooling/mb-cooler/mb-special-water-cooler/9686/watercool-heatkiller-nsb-rev3.0-nickel

 

Thanks Airdeano

[airdeano]

I have seen these before. I thought they are CPU Water Blocks ( Lower grade for low/medium range CPUs )

 

I think I will go with this one http://www.aquatuning.co.uk/water-cooling/mb-cooler/mb-special-water-cooler/9686/watercool-heatkiller-nsb-rev3.0-nickel

 

Thanks Airdeano

 

good choice. Watercool is a premier manufacturer of water cooling products. and heavy, too.

[alleyn321]

Update: Now Im confused if this Blockhttp://www.aquatuning.co.uk/water-cooling/mb-cooler/mb-special-water-cooler/9686/watercool-heatkiller-nsb-rev3.0-nickel is going to fit my Motherboard

[airdeano]

Update: Now Im confused if this Blockhttp://www.aquatuning.co.uk/water-cooling/mb-cooler/mb-special-water-cooler/9686/watercool-heatkiller-nsb-rev3.0-nickel is going to fit my Motherboard

 

you'll be fine as the kit includes 2 mounting brackets:

 

Included:

1x HEATKILLER® NSB Rev3.0  Ni

1x Mounting plate (43.0 to 59.0 mm)

1x Mounting plate (59.5 to 79.2 mm)

1x Installation material/manual

 

kinda universal with multiple mounting brackets.

[alleyn321]

Okay ... Thanks!