Tubing required?

[badogski29]

I am planning to do my first WC build and i don't know how much tubing do i need. Ill have at least two rads and 1 block for the cpu and the gpu. Is 10 feet enough in my case??

[Tea1337]

10 feet will be plenty

[Maxwit44]

@badogski29

 

Unless its a caselabs case or a 900D, then I would say yes. You'd be hard pressed in most cases to do a run longer than 50cm. Sorry about the pun, its just how it worked out.

[wng_kingsley7]

I am planning to do my first WC build and i don't know how much tubing do i need. Ill have at least two rads and 1 block for the cpu and the gpu. Is 10 feet enough in my case??

10Ft sounds about just right. Most tubing runs will be less then 3/4 quarters of a foot long so you have ample lengths of tubing. What case are you using if you don't mind me asking.

[cooperred]

10ft is more than enough 99% of the time.

[Lays]

@badogski29

 

Unless its a caselabs case or a 900D, then I would say yes. You'd be hard pressed in most cases to do a run longer than 50cm. Sorry about the pun, its just how it worked out.

 

 

I had a 900D with 2 480mm radiators + 2 GPU + Cpu block + reservoir + pump

 

I only used like 6-7 feet total, 10 feet is a LOT of tubing, small builds would most likely only need ~3-5 feet if all the runs are measured pre-cut.

[badogski29]

thanks for all the reply peeps

 

10Ft sounds about just right. Most tubing runs will be less then 3/4 quarters of a foot long so you have ample lengths of tubing. What case are you using if you don't mind me asking.

I'm using an air 540, welp looks like its more than enough thanks again everyone. I just can't picture 10ft in my mind so thats why i asked.