Posted July 25, 2014 Hi guys, I've got some questions about the voltages the CPU (4930K) runs at. I had a look at the datasheet for the processor and it says at a page 63 Table 7-8 that the Vcc is in between -0.3 to 1.4 Volts. Further down the document another Table 7-10 on page 64 says that Vcc VID Range is from 0.6 to 1.35 Volts. As far I know the VID communicates with the VRM to get the standard voltages from the VRM to power the CPU whereas the CPU has the basic information stored in it so it tells the VRM "safe" information (not manually changed). But I don't really understand why the Voltage ranges differ in those two tables. Initially I was looking for the maximum voltage the CPU should get for long term reliability. Funnily enough an internet hardware shop tells me that the Voltage for the CPU is in between 1.35 to 1.6 Volts. What the heck is the right Voltage to power the CPU?! The datasheet: http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/4th-gen-core-i7-lga2011-datasheet-vol-1.pdf If anyone with a good understanding of pc architecture would enlighten me or at least recommend a good book about pc architecture I would appreciate that!!! I'm going to study computer science next term, maybe that will help a bit Thanks! Best, Michi Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 Author sorry, I push this one Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 @sauerkraut Most of this was way over my head, but if I assume that you're looking for a safe vcore voltage for overclocking, I might be able to help you there. VCore and VCCSA are different voltages, and unless you're pushing your CPU to the limit in overclocking, I think upping the VCCSA voltage does not do much. I found that it didn't particularly help or hinder my overclock when I fiddled with it. VCore is the voltage that you change for overclocking. For the 3930k, the general consensus was that a vcore below 1.4V was good for a 24/7 overclock. Personally I have my 3930K at 4.5 GHz at 1.325V. Unless you're on a really good water cooling loop, you'll probably be temperature limited before anything else. I decided to keep mine below 1.33V and about 75C, but that's probably "too hot" for a lot of people. Ivy Bridge-E (4930K) was pretty similar to SB-E for overclocking (as I understand it), so keeping it below 1.4V is probably a good idea. 1.6V is ludicrous, don't do that. You will obliterate your CPU. I can't remember offhand what the "stock" voltage for my CPU was, but I want to say that it was about 1.25V. It sounds a lot like that internet hardware shop doesn't know what they hell they're talking about. I can't think of a CPU that used that range of voltage (1.35-1.6V). Isopropyl alcohol is all you need for cleaning CPU's and motherboard components. No, you don't need [insert cleaning solution here]. -Source: PhD Student, Chemistry Why overclockers should understand Load-Line Calibration. ASUS Rampage IV Black Edition || i7 3930k @ 4.5 GHz || 32 GB Corsair Vengeance CL8 || ASUS GTX 780 DCuII || ASUS Xonar Essence STX || XFX PRO 1000W Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 1.4v is considered the max voltage and that's when overclocked. At stock you'll probably just get less than that. voltage varies between cpu bins I believe. LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 Author Thank you for the information! I'll be careful with overclocking anyway but since I got an unlocked processor I surely will do it a little bit. Yes, I wanted to know about the max Vcore initially so thank you for the 1.4V info Have you already tried the 4-way optimization that comes with newer Asus boards? JJ from Asus shows how it is done and it looks simple and safe. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 Thank you for the information! I'll be careful with overclocking anyway but since I got an unlocked processor I surely will do it a little bit. Yes, I wanted to know about the max Vcore initially so thank you for the 1.4V info Have you already tried the 4-way optimization that comes with newer Asus boards? JJ from Asus shows how it is done and it looks simple and safe. I haven't as my ITX Z97 board doesn't feature it, but it seems pretty good to establish a base line overclock to work with. LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 Have you already tried the 4-way optimization that comes with newer Asus boards? JJ from Asus shows how it is done and it looks simple and safe. The 4-way optimization is okay, but not great. It will way overvolt for the multiplier you get. Manual will give you a much more efficient, probably cooler, overclock. Make sure you set your Load-Line Calibration before overclocking. Which board are you using? Isopropyl alcohol is all you need for cleaning CPU's and motherboard components. No, you don't need [insert cleaning solution here]. -Source: PhD Student, Chemistry Why overclockers should understand Load-Line Calibration. ASUS Rampage IV Black Edition || i7 3930k @ 4.5 GHz || 32 GB Corsair Vengeance CL8 || ASUS GTX 780 DCuII || ASUS Xonar Essence STX || XFX PRO 1000W Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted July 26, 2014 Author The 4-way optimization is okay, but not great. It will way overvolt for the multiplier you get. Manual will give you a much more efficient, probably cooler, overclock. Make sure you set your Load-Line Calibration before overclocking. Which board are you using? An Asus x79-deluxe. Should be here next week. Last part I am waiting for Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted December 2, 2016 well i know this thread is old but here is my CHIP 1.2vcore at 4.2ghz Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now