Need help broken mic jack

[yaha1234]

Hi guys 

 

i need help on how to remove the end of my broken mic jack in my mother board tried using tweezers still cant get it out

 

thank in advance 

[Jobbe03]

Tweezers and patience is the only way to go

[Enderman]

SUCTION CUP

If tweezers dont work then you're pretty much screwed.

[W-L]

Hi guys 

 

i need help on how to remove the end of my broken mic jack in my mother board tried using tweezers still cant get it out

 

thank in advance 

It depends which portion broke off if it's the whole jack a pair of tweezers may work or precision pilers will work better since you can apply more pressure when pulling. 

 

If the tip broke off you may need to try and access it via the rear of possible to push it out if it's not possible then you can try the solder and wire method but it's very risky in damaging things from heat.

 

http://www.instructables.com/id/Pulling-out-tip-of-a-broken-35-jack-connector/

[Johannes_Lazor]

If you become desperate you could get a soundcard and plug it into that.
Or simply use the front one.

[AlwaysFSX]

Put a magnet on it. It should attach and you can pull it right out.

[DroPouT1999]

When i did this to my Sub i found a small screw and screwed it into the snapped jack and pulled it out with pliers.